Plan du site
Chapitre 72 – Iron and steel
Éléments de « Chapitre 72 – Iron and steel » (28). Chaque élément mène à sa page et à son sous-plan.
↑ Niveau supérieur: SECTION XV Ouvrir la page → sitemap.xml · 136 sitemaps XML suivant l'arborescence ; chaque page comporte des liens hreflang pour toutes les langues.
-
- 7202.11.00 – - - Containing by weight more than 2% of carbon
- 7202.19.00 – - - Other
- 7202.21.00 – - - Containing by weight more than 55% of silicon
- 7202.29.00 – - - Other
- 7202.30.00 – - Ferro-silico-manganese
- 7202.41.00 – - - Containing by weight more than 4% of carbon
- 7202.49.00 – - - Other
- 7202.50.00 – - Ferro-silico-chromium
- 7202.60.00 – - Ferro-nickel
- 7202.70.00 – - Ferro-molybdenum
- 7202.80.00 – - Ferro-tungsten and ferro-silico-tungsten
- 7202.91.00 – - - Ferro-titanium and ferro-silico-titanium
- 7202.92.00 – - - Ferro-vanadium
- 7202.93.00 – - - Ferro-niobium
- 7202.99.00 – - - Other
-
- 7204.10.00 – - Waste and scrap of cast iron
- 7204.21.00 – - - Of stainless steel
- 7204.29.00 – - - Other
- 7204.30.00 – - Waste and scrap of tinned iron or steel
- 7204.41.00 – - - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bu…
- 7204.49.00 – - - Other
- 7204.50.00 – - Remelting scrap ingots
-
- 7207.11.00 – - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
- 7207.12 – - - Other, of rectangular (other than square) cross-section:
- 7207.12.10 – - - - Slabs
- 7207.12.90 – - - - Other
- 7207.19.00 – - - Other
- 7207.20 – - Containing by weight 0.25% or more of carbon:
- 7207.20.10 – - - - Slabs
- 7207.20.21 – - - - - Blocks roughly shaped by forging; sheet bars
- 7207.20.29 – - - - - Other
- 7207.20.91 – - - - Slabs
- 7207.20.92 – - - - - Blocks roughly shaped by forging; sheet bars
- 7207.20.99 – - - - - Other
-
- 7208.10.00 – - In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00 – - - Of a thickness of 4.75 mm or more
- 7208.26.00 – - - Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27 – - - Of a thickness of less than 3 mm:
- 7208.27.11 – - - - - Containing by weight 0.6% or more of carbon
- 7208.27.19 – - - - - Other
- 7208.27.91 – - - - - Containing by weight 0.6% or more of carbon
- 7208.27.99 – - - - - Other
- 7208.36.00 – - - Of a thickness exceeding 10 mm
- 7208.37.00 – - - Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00 – - - Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39 – - - Of a thickness of less than 3 mm:
- 7208.39.10 – - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less
- 7208.39.20 – - - - Containing by weight less than 0.6% of carbon and of a thickness more than 0.17 mm but not exceeding 1.…
- 7208.39.30 – - - - Containing by weight 0.6% or more of carbon and of a thickness not exceeding 1.5 mm
- 7208.39.40 – - - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm
- 7208.39.90 – - - - Other
- 7208.40.00 – - Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.00 – - - Of a thickness exceeding 10 mm
- 7208.52.00 – - - Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00 – - - Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54 – - - Of a thickness of less than 3 mm:
- 7208.54.10 – - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less
- 7208.54.90 – - - - Other
- 7208.90 – - Other:
- 7208.90.10 – - - Corrugated
- 7208.90.20 – - - Other, containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less
- 7208.90.90 – - - Other
-
- 7209.15.00 – - - Of a thickness of 3 mm or more
- 7209.16 – - - Of a thickness exceeding 1 mm but less than 3 mm:
- 7209.16.10 – - - - Of a width not exceeding 1,250 mm
- 7209.16.90 – - - - Other
- 7209.17 – - - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
- 7209.17.10 – - - - Of a width not exceeding 1,250 mm
- 7209.17.90 – - - - Other
- 7209.18 – - - Of a thickness of less than 0.5 mm:
- 7209.18.10 – - - - Tin-mill blackplate
- 7209.18.91 – - - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less
- 7209.18.99 – - - - - Other
- 7209.25.00 – - - Of a thickness of 3 mm or more
- 7209.26 – - - Of a thickness exceeding 1 mm but less than 3 mm:
- 7209.26.10 – - - - Of a width not exceeding 1,250 mm
- 7209.26.90 – - - - Other
- 7209.27 – - - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
- 7209.27.10 – - - - Of a width not exceeding 1,250 mm
- 7209.27.90 – - - - Other
- 7209.28 – - - Of a thickness of less than 0.5 mm:
- 7209.28.10 – - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less
- 7209.28.90 – - - - Other
- 7209.90 – - Other:
- 7209.90.10 – - - Corrugated
- 7209.90.90 – - - Other
-
- 7210.11 – - - Of a thickness of 0.5 mm or more:
- 7210.11.10 – - - - Containing by weight 0.6% or more of carbon
- 7210.11.90 – - - - Other
- 7210.12 – - - Of a thickness of less than 0.5 mm:
- 7210.12.10 – - - - Containing by weight 0.6% or more of carbon
- 7210.12.90 – - - - Other
- 7210.20 – - Plated or coated with lead, including terne-plate:
- 7210.20.10 – - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
- 7210.20.90 – - - Other
- 7210.30 – - Electrolytically plated or coated with zinc:
- 7210.30.11 – - - - Of a thickness not exceeding 1.2 mm
- 7210.30.12 – - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
- 7210.30.19 – - - - Other
- 7210.30.91 – - - - Of a thickness not exceeding 1.2 mm
- 7210.30.99 – - - - Other
- 7210.41 – - - Corrugated:
- 7210.41.11 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.41.12 – - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
- 7210.41.19 – - - - - Other
- 7210.41.91 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.41.99 – - - - - Other
- 7210.49 – - - Other:
- 7210.49.11 – - - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04% of car…
- 7210.49.14 – - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm
- 7210.49.15 – - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceed…
- 7210.49.16 – - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm
- 7210.49.17 – - - - - Other, of a thickness not exceeding 1.2 mm
- 7210.49.18 – - - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
- 7210.49.19 – - - - - Other
- 7210.49.91 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.49.99 – - - - - Other
- 7210.50.00 – - Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61 – - - Plated or coated with aluminium-zinc alloys:
- 7210.61.11 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.61.12 – - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
- 7210.61.19 – - - - - Other
- 7210.61.91 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.61.92 – - - - - Other, corrugated
- 7210.61.99 – - - - - Other
- 7210.69 – - - Other:
- 7210.69.11 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.69.19 – - - - - Other
- 7210.69.91 – - - - - Of a thickness not exceeding 1.2 mm
- 7210.69.99 – - - - - Other
- 7210.70 – - Painted, varnished or coated with plastics:
- 7210.70.12 – - - - Painted after coating with zinc
- 7210.70.13 – - - - Painted after coating with aluminium-zinc alloys
- 7210.70.19 – - - - Other
- 7210.70.21 – - - - Painted
- 7210.70.29 – - - - Other
- 7210.70.91 – - - - Painted
- 7210.70.99 – - - - Other
- 7210.90 – - Other:
- 7210.90.10 – - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
- 7210.90.90 – - - Other
-
- 7211.13 – - - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less tha…
- 7211.13.12 – - - - - Corrugated
- 7211.13.13 – - - - - Hoop and strip
- 7211.13.14 – - - - - Universal plates
- 7211.13.19 – - - - - Other
- 7211.13.92 – - - - - Hoop and strip
- 7211.13.93 – - - - - Universal plates
- 7211.13.99 – - - - - Other
- 7211.14 – - - Other, of a thickness of 4.75 mm or more:
- 7211.14.14 – - - - - Corrugated
- 7211.14.15 – - - - - Coils for re-rolling
- 7211.14.16 – - - - - Hoop and strip
- 7211.14.17 – - - - - Universal plates
- 7211.14.19 – - - - - Other
- 7211.14.94 – - - - - Hoop and strip
- 7211.14.95 – - - - - Universal plates
- 7211.14.99 – - - - - Other
- 7211.19 – - - Other:
- 7211.19.13 – - - - - Hoop and strip; universal plates
- 7211.19.14 – - - - - Corrugated
- 7211.19.19 – - - - - Other
- 7211.19.91 – - - - - Hoop and strip; universal plates
- 7211.19.99 – - - - - Other
- 7211.23 – - - Containing by weight less than 0.25% of carbon:
- 7211.23.10 – - - - Corrugated
- 7211.23.20 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7211.23.30 – - - - Other, of a thickness of 0.17 mm or less
- 7211.23.90 – - - - Other
- 7211.29 – - - Other:
- 7211.29.10 – - - - Corrugated
- 7211.29.20 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7211.29.30 – - - - Other, of a thickness of 0.17 mm or less
- 7211.29.90 – - - - Other
- 7211.90 – - Other:
- 7211.90.11 – - - - Hoop and strip, of a width not exceeding 25 mm
- 7211.90.12 – - - - Hoop and strip, of a width exceeding 400 mm
- 7211.90.13 – - - - Corrugated
- 7211.90.14 – - - - Other, of a thickness of 0.17 mm or less
- 7211.90.19 – - - - Other
- 7211.90.91 – - - - Of a thickness of 0.17 mm or less
- 7211.90.99 – - - - Other
-
- 7212.10 – - Plated or coated with tin:
- 7212.10.11 – - - - Hoop and strip, of a width not exceeding 25 mm
- 7212.10.14 – - - - Hoop and strip, of a width exceeding 400 mm
- 7212.10.19 – - - - Other
- 7212.10.94 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7212.10.99 – - - - Other
- 7212.20 – - Electrolytically plated or coated with zinc:
- 7212.20.10 – - - Hoop and strip, of a width not exceeding 400 mm
- 7212.20.20 – - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less
- 7212.20.90 – - - Other
- 7212.30 – - Otherwise plated or coated with zinc:
- 7212.30.11 – - - - Hoop and strip, of a width not exceeding 25 mm
- 7212.30.12 – - - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm
- 7212.30.13 – - - - Other, of a thickness of 1.5 mm or less
- 7212.30.14 – - - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04% of …
- 7212.30.19 – - - - Other
- 7212.30.90 – - - Other
- 7212.40 – - Painted, varnished or coated with plastics:
- 7212.40.11 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7212.40.12 – - - - Other hoop and strip
- 7212.40.13 – - - - Other, painted after coating with zinc
- 7212.40.14 – - - - Other, painted after coating with aluminium-zinc alloys
- 7212.40.19 – - - - Other
- 7212.40.91 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7212.40.99 – - - - Other
- 7212.50 – - Otherwise plated or coated:
- 7212.50.14 – - - - Hoop and strip, of a width exceeding 25 mm; universal plates
- 7212.50.19 – - - - Other
- 7212.50.23 – - - - Hoop and strip, of a width not exceeding 25 mm
- 7212.50.24 – - - - Other hoop and strip; universal plates
- 7212.50.29 – - - - Other
- 7212.50.93 – - - - Hoop and strip, of a width not exceeding 25 mm
- 7212.50.94 – - - - Other hoop and strip; universal plates
- 7212.50.99 – - - - Other
- 7212.60 – - Clad:
- 7212.60.11 – - - - Hoop and strip
- 7212.60.12 – - - - Other, of a thickness of 1.5 mm or less
- 7212.60.19 – - - - Other
- 7212.60.91 – - - - Hoop and strip
- 7212.60.99 – - - - Other
-
- 7213.10 – - Containing indentations, ribs, grooves or other deformations produced during the rolling process:
- 7213.10.10 – - - Of circular cross-section measuring not exceeding 50 mm in diameter
- 7213.10.90 – - - Other
- 7213.20.00 – - Other, of free-cutting steel
- 7213.91 – - - Of circular cross-section measuring less than 14 mm in diameter:
- 7213.91.10 – - - - Of a kind used for producing soldering sticks
- 7213.91.20 – - - - Of a kind used for concrete reinforcement (rebars)
- 7213.91.30 – - - - Other, containing by weight 0.6% or more of carbon, not more than 0.03% of phosphorus and not more than…
- 7213.91.90 – - - - Other
- 7213.99 – - - Other:
- 7213.99.10 – - - - Of a kind used for producing soldering sticks
- 7213.99.20 – - - - Of a kind used for concrete reinforcement (rebars)
- 7213.99.90 – - - - Other
-
- 7214.10 – - Forged:
- 7214.10.11 – - - - Of circular cross-section
- 7214.10.19 – - - - Other
- 7214.10.21 – - - - Of circular cross-section
- 7214.10.29 – - - - Other
- 7214.20 – - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted…
- 7214.20.31 – - - - - Of a kind used for concrete reinforcement (rebars)
- 7214.20.39 – - - - - Other
- 7214.20.41 – - - - - Of a kind used for concrete reinforcement (rebars)
- 7214.20.49 – - - - - Other
- 7214.20.51 – - - - - Of a kind used for concrete reinforcement (rebars)
- 7214.20.59 – - - - - Other
- 7214.20.61 – - - - - Of a kind used for concrete reinforcement (rebars)
- 7214.20.69 – - - - - Other
- 7214.30 – - Other, of free-cutting steel:
- 7214.30.10 – - - Of circular cross-section
- 7214.30.90 – - - Other
- 7214.91 – - - Of rectangular (other than square) cross-section:
- 7214.91.11 – - - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese
- 7214.91.12 – - - - - Containing by weight 0.17% or more but not more than 0.46% of carbon and 1.2% or more but less than 1…
- 7214.91.19 – - - - - Other
- 7214.91.20 – - - - Containing by weight 0.6% or more of carbon
- 7214.99 – - - Other:
- 7214.99.11 – - - - - Containing by weight less than 1.15% of manganese
- 7214.99.19 – - - - - Other
- 7214.99.91 – - - - - Containing by weight less than 0.38% of carbon, not more than 0.05% of phosphorus and not more than 0…
- 7214.99.92 – - - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese
- 7214.99.93 – - - - - Containing by weight 0.17% or more but less than 0.46% of carbon and 1.2% or more but less than 1.65%…
- 7214.99.99 – - - - - Other
-
- 7215.10 – - Of free-cutting steel, not further worked than cold-formed or cold-finished:
- 7215.10.10 – - - Of circular cross-section
- 7215.10.90 – - - Other
- 7215.50 – - Other, not further worked than cold-formed or cold-finished:
- 7215.50.10 – - - Containing by weight 0.6% or more of carbon, other than of circular cross-section
- 7215.50.91 – - - - Of a kind used for concrete reinforcement (rebars)
- 7215.50.99 – - - - Other
- 7215.90 – - Other:
- 7215.90.10 – - - Of a kind used for concrete reinforcement (rebars)
- 7215.90.91 – - - - Of circular cross-section
- 7215.90.99 – - - - Other
-
- 7216.10.00 – - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 …
- 7216.21 – - - L sections:
- 7216.21.10 – - - - Containing by weight less than 0.6% of carbon
- 7216.21.90 – - - - Other
- 7216.22.00 – - - T sections
- 7216.31 – - - U sections:
- 7216.31.10 – - - - Containing by weight 0.6% or more of carbon
- 7216.31.90 – - - - Other
- 7216.32 – - - I sections:
- 7216.32.10 – - - - Of a thickness of 5 mm or less
- 7216.32.90 – - - - Other
- 7216.33 – - - H sections:
- 7216.33.11 – - - - - Thickness of the flange not less than thickness of the web
- 7216.33.19 – - - - - Other
- 7216.33.90 – - - - Other
- 7216.40 – - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
- 7216.40.10 – - - Containing by weight 0.6% or more of carbon
- 7216.40.90 – - - Other
- 7216.50 – - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded:
- 7216.50.11 – - - - Containing by weight 0.6% or more of carbon
- 7216.50.19 – - - - Other
- 7216.50.91 – - - - Containing by weight 0.6% or more of carbon
- 7216.50.99 – - - - Other
- 7216.61.00 – - - Obtained from flat-rolled products
- 7216.69.00 – - - Other
- 7216.91 – - - Cold-formed or cold-finished from flat-rolled products:
- 7216.91.10 – - - - Angles, other than slotted angles, containing by weight 0.6% or more of carbon
- 7216.91.90 – - - - Other
- 7216.99.00 – - - Other
-
- 7217.10 – - Not plated or coated, whether or not polished:
- 7217.10.10 – - - Containing by weight less than 0.25% of carbon
- 7217.10.22 – - - - Reed wire; wire of a kind used for making strands for prestressing concrete; free-cutting steel wire
- 7217.10.29 – - - - Other
- 7217.10.32 – - - - Spokes wire; reed wire; free-cutting steel wire
- 7217.10.33 – - - - Wire of a kind used for making strands for prestressing concrete
- 7217.10.39 – - - - Other
- 7217.20 – - Plated or coated with zinc:
- 7217.20.10 – - - Containing by weight less than 0.25% of carbon
- 7217.20.20 – - - Containing by weight 0.25% or more of carbon but less than 0.45% of carbon
- 7217.20.91 – - - - Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR)
- 7217.20.99 – - - - Other
- 7217.30 – - Plated or coated with other base metals:
- 7217.30.11 – - - - Plated or coated with tin
- 7217.30.19 – - - - Other
- 7217.30.20 – - - Containing by weight 0.25% or more of carbon but less than 0.6% of carbon
- 7217.30.33 – - - - Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres
- 7217.30.34 – - - - Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres
- 7217.30.35 – - - - Other, plated or coated with tin
- 7217.30.39 – - - - Other
- 7217.90 – - Other:
- 7217.90.10 – - - Containing by weight less than 0.25% of carbon
- 7217.90.90 – - - Other
-
- 7219.11.00 – - - Of a thickness exceeding 10 mm
- 7219.12.00 – - - Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.13.00 – - - Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00 – - - Of a thickness of less than 3 mm
- 7219.21.00 – - - Of a thickness exceeding 10 mm
- 7219.22.00 – - - Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00 – - - Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00 – - - Of a thickness of less than 3 mm
- 7219.31.00 – - - Of a thickness of 4.75 mm or more
- 7219.32.00 – - - Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00 – - - Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00 – - - Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00 – - - Of a thickness of less than 0.5 mm
- 7219.90.00 – - Other
-
- 7220.11 – - - Of a thickness of 4.75 mm or more:
- 7220.11.10 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7220.11.90 – - - - Other
- 7220.12 – - - Of a thickness of less than 4.75 mm:
- 7220.12.10 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7220.12.90 – - - - Other
- 7220.20 – - Not further worked than cold-rolled (cold-reduced):
- 7220.20.10 – - - Hoop and strip, of a width not exceeding 400 mm
- 7220.20.90 – - - Other
- 7220.90 – - Other:
- 7220.90.10 – - - Hoop and strip, of a width not exceeding 400 mm
- 7220.90.90 – - - Other
- 7221.00.00 – Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
-
- 7222.11.00 – - - Of circular cross-section
- 7222.19.00 – - - Other
- 7222.20 – - Bars and rods, not further worked than cold-formed or cold-finished:
- 7222.20.10 – - - Of circular cross-section
- 7222.20.90 – - - Other
- 7222.30 – - Other bars and rods:
- 7222.30.10 – - - Of circular cross-section
- 7222.30.90 – - - Other
- 7222.40 – - Angles, shapes and sections:
- 7222.40.10 – - - Not further worked than hot-rolled, hot-drawn or extruded
- 7222.40.90 – - - Other
-
- 7225.11.00 – - - Grain-oriented
- 7225.19.00 – - - Other
- 7225.30 – - Other, not further worked than hot-rolled, in coils:
- 7225.30.10 – - - Of high speed steel
- 7225.30.90 – - - Other
- 7225.40 – - Other, not further worked than hot-rolled, not in coils:
- 7225.40.10 – - - Of high speed steel
- 7225.40.90 – - - Other
- 7225.50 – - Other, not further worked than cold-rolled (cold-reduced):
- 7225.50.10 – - - Of high speed steel
- 7225.50.90 – - - Other
- 7225.91 – - - Electrolytically plated or coated with zinc:
- 7225.91.10 – - - - Of high speed steel
- 7225.91.90 – - - - Other
- 7225.92 – - - Otherwise plated or coated with zinc:
- 7225.92.10 – - - - Of high speed steel
- 7225.92.20 – - - - Other, plated or coated with zinc-aluminium-magnesium alloys
- 7225.92.90 – - - - Other
- 7225.99 – - - Other:
- 7225.99.10 – - - - Of high speed steel
- 7225.99.90 – - - - Other
-
- 7226.11 – - - Grain-oriented:
- 7226.11.10 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7226.11.90 – - - - Other
- 7226.19 – - - Other:
- 7226.19.10 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7226.19.90 – - - - Other
- 7226.20 – - Of high speed steel:
- 7226.20.10 – - - Hoop and strip, of a width not exceeding 400 mm
- 7226.20.90 – - - Other
- 7226.91 – - - Not further worked than hot-rolled:
- 7226.91.10 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7226.91.90 – - - - Other
- 7226.92 – - - Not further worked than cold-rolled (cold-reduced):
- 7226.92.10 – - - - Hoop and strip, of a width not exceeding 400 mm
- 7226.92.90 – - - - Other
- 7226.99 – - - Other:
- 7226.99.11 – - - - - Plated or coated with zinc
- 7226.99.19 – - - - - Other
- 7226.99.91 – - - - - Plated or coated with zinc
- 7226.99.99 – - - - - Other
-
- 7228.10 – - Bars and rods, of high speed steel:
- 7228.10.10 – - - Of circular cross-section
- 7228.10.90 – - - Other
- 7228.20 – - Bars and rods, of silico-manganese steel:
- 7228.20.11 – - - - Not further worked than hot-rolled, hot-drawn or extruded
- 7228.20.19 – - - - Other
- 7228.20.91 – - - - Not further worked than hot-rolled, hot - drawn or extruded
- 7228.20.99 – - - - Other
- 7228.30 – - Other bars and rods, not further worked than hot - rolled, hot -drawn or extruded:
- 7228.30.10 – - - Of circular cross-section
- 7228.30.90 – - - Other
- 7228.40 – - Other bars and rods, not further worked than forged:
- 7228.40.10 – - - Of circular cross-section
- 7228.40.90 – - - Other
- 7228.50 – - Other bars and rods, not further worked than cold-formed or cold-finished:
- 7228.50.10 – - - Of circular cross-section
- 7228.50.90 – - - Other
- 7228.60 – - Other bars and rods:
- 7228.60.10 – - - Of circular cross-section
- 7228.60.90 – - - Other
- 7228.70 – - Angles, shapes and sections:
- 7228.70.10 – - - Not further worked than hot-rolled, hot-drawn or extruded
- 7228.70.90 – - - Other
- 7228.80 – - Hollow drill bars and rods:
- 7228.80.11 – - - - Of circular cross-section
- 7228.80.19 – - - - Other
- 7228.80.90 – - - Other