SMART TARIFF ADVISORY
輸入関税アドバイザリー
税率オプション、FTAリスク、HS分類、貿易救済措置、必要書類を評価するルールベースのエンジン。
輸入関税アドバイザリーレポート
- HSコード
- 7210.70.29
- 記述
- Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated / - Painted, varnished or coated with plastics: / - - Other, containing by weight less than 0.6% of carbon: / - - - Other
- 原産国
- 未入力
- 輸入日
- 2026/10/13 · データ年 2026
- 作成日時
- 13/10/2026 17:58 · データバージョン 2026.04.05
- 確認状況
- 税率は原典ファイルと照合済み。FTA適用資格は未確認。対応付け・助言は参考情報です。
7YELLOW – REVIEW REQUIRED
1GREEN – VERIFIED
1. 推奨される税率オプション
| # | 税率区分 | 公表税率 | 推奨 | ランキング基準 | 原産地証明 |
|---|---|---|---|---|---|
| – | MFN | 5% | 比較基準 | WTO/MFN相手国に適用 | |
| – | 通常輸入税 | 7.5% | 比較基準 | MFN条件を満たさない場合 | |
| 1 | ACFTA BT2026 統合税率表 · 2022 - 2027 (một mức cho cả giai đoạn) |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | E |
| 2 | AHKFTA BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | AHK |
| 3 | AJCEP BT2026 統合税率表 · 01/4/2026 - 31/3/2027 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | AJ |
| 4 | AKFTA BT2026 統合税率表 · 2022 - 2027 (một mức cho cả giai đoạn) |
0% (除く ID, MM, PH) | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | AK |
| 5 | ATIGA BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | D |
| 6 | CPTPP BT2026 統合税率表 · (VI) |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | CPTPP |
| 7 | EVFTA BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | EUR.1 |
| 8 | RCEP (附属書 A) BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | RCEP Form / Declaration of origin |
| 9 | RCEP (附属書 B) BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | RCEP Form / Declaration of origin |
| 10 | RCEP (附属書 C) BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | RCEP Form / Declaration of origin |
| 11 | RCEP (附属書 D) BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | RCEP Form / Declaration of origin |
| 12 | RCEP (附属書 E) BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | RCEP Form / Declaration of origin |
| 13 | RCEP (附属書 F) BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | RCEP Form / Declaration of origin |
| 14 | UKVFTA BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | EUR.1 |
| 15 | VCFTA BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | VC |
| 16 | VJEPA BT2026 統合税率表 · 01/4/2026 - 31/3/2027 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | JV · Form VJ |
| 17 | VKFTA BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | VK |
| 18 | VN-EAEU BT2026 統合税率表 · 2026 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | EAV |
| 19 | VN-LAO BT2026 統合税率表 |
0% | 公表最低税率 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | S |
| 20 | VIFTA BT2026 統合税率表 · 2026 |
2.1% | 書類が必要 | ✓ 税率? 国✓ 年? 書類✗ 法令✗ 確認済み | Form VI (verify) |
| 21 | AANZFTA BT2026 統合税率表 · 2022 - 2027 (một mức cho cả giai đoạn) |
5% | 書類が必要 | ✓ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | AANZ |
| 22 | VN-CAM データなし |
データなし | 適用資格未確認 | ✗ 税率? 国✗ 年? 書類✓ 法令✗ 確認済み | S |
| 23 | VNCU データなし |
データなし | 適用資格未確認 | ✗ 税率? 国✗ 年? 書類✓ 法令✗ 確認済み | VNCB · Form VC (Cuba) |
| 24 | AIFTA BT2026 統合税率表 · 01/01/2026 - 31/12/2026 |
* 特恵対象外 | 適用外 | ✗ 税率? 国✓ 年? 書類✓ 法令✗ 確認済み | AI |
最低税率だけでなく、複数の基準（税率、国、年、書類、法令、確認状況）で順位付けしています。
2. 潜在的な節税額
節税額を計算するには課税価格（VND以外の場合は為替レートも）を入力してください。
3. FTA適用資格の確認
YELLOW – REVIEW REQUIRED FTA-013 FTA rate not lower than MFN
- 説明
- AANZFTA 5%: the preferential rate is equal to or higher than the MFN rate (5%) in the source tariff – claiming the FTA brings no saving.
- 関連データ
- MFN 5%
- 推奨アクション
- Consider the MFN rate (if the origin qualifies for MFN treatment) instead of preparing FTA origin documents.
- 確認状況
- 未確認 – 確認が必要
YELLOW – REVIEW REQUIRED OR-001 Country of origin not provided
- 説明
- FTA eligibility cannot be assessed without the country of origin.
- 推奨アクション
- Enter the country of origin to compare preferential schedules.
- 確認状況
- 未確認 – 確認が必要
4. HS分類に関する警告
YELLOW – REVIEW REQUIRED HS-003 Classification Review Required – similar lines exist
- 説明
- Subheading 7210.70 has 7 lines; 7210.70.29 is distinguished from its siblings by: Other.
- 関連データ
- 7210.70.12 Painted after coating with zinc; 7210.70.13 Painted after coating with aluminium-zinc alloys; 7210.70.19 Other; 7210.70.21 Painted; 7210.70.91 Painted; 7210.70.99 Other
- 法的根拠
- 31/2022/TT-BTC
- 推奨アクション
- Verify the distinguishing features; consider an advance classification ruling if uncertain.
- 確認状況
- 未確認 – 確認が必要
YELLOW – REVIEW REQUIRED HS-004 HS code introduced in the 2023 nomenclature
- 説明
- 7210.70.29 is flagged as a code newly added in the 2023 tariff (worksheet MOI). Contracts, C/Os or older documents may cite 2017 codes.
- 関連データ
- MOI: 7210.70.29
- 法的根拠
- 31/2022/TT-BTC
- 推奨アクション
- Make sure the C/O and documents show a consistent HS code; the source has no old→new correlation table.
- 確認状況
- 未確認 – 確認が必要
5. 貿易救済措置アドバイザリー
YELLOW – REVIEW REQUIRED TR-003 Trade remedy exists for other origins
- 説明
- アンチダンピング: Một số sản phẩm thép hợp kim hoặc không hợp kim được cán phẳng, được sơn – applies to KR, CN (2822/QĐ-BCT). The selected origin is not listed, but circumvention risk should be considered.
- 関連データ
- TR-10 · Áp thuế chống bán phá giá đối với Một số sản phẩm thép hợp kim hoặc không hợp kim được cán phẳng, được sơn (KR, CN)
- 法的根拠
- 2822/QĐ-BCT
- 推奨アクション
- Keep evidence of true origin and actual producer.
- 確認状況
- 根拠：HT + BT2026 品目政策欄（原典）。詳細な対象範囲は未確認
6. 法令・税務に関する警告
YELLOW – REVIEW REQUIRED TAX-001 Several VAT rates
- 説明
- The VAT column shows "10/8". Không được giảm VAT theo 174/2025/NĐ-CP - PL1: Sản phẩm thép cuộn phẳng đã được dát phủ, mạ hoặc tráng; Sản phẩm thép kỹ thuật điện, thép gió > Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, đã được dát phủ, mạ hoặc tráng. Gồm: Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được mạ hoặc tráng thiếc; Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được mạ hoặc tráng chì kể cả hợp kim chì thiếc; Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được mạ hoặc tráng kẽm bằng phương pháp điện phân; Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được mạ hoặc tráng kẽm bằng phương pháp khác; Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được mạ hoặc tráng oxit crôm hoặc bằng crôm và oxit crôm; Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được mạ hoặc tráng nhôm; Thép không hợp kim cuộn phẳng có chiều rộng ≥ 600mm, được sơn, quét vecni hoặc phủ plastic (Tham chiếu mã HS 4 số)
- 法的根拠
- 174/2025/NĐ-CP - PL1
- 推奨アクション
- Determine the VAT rate by the nature of goods and reduction rules (174/2025/NĐ-CP, Annex I/II).
- 確認状況
- 未確認 – 確認が必要
GREEN – VERIFIED DQ-001 MFN rate present in the source
- 説明
- The MFN rate 5% for 7210.70.29 was checked against BT2026 (cell BT2026!N11134), basis 26/2023/NĐ-CP.
- 法的根拠
- 26/2023/NĐ-CP
- 推奨アクション
- Verification scope: matched against source file version 2026.04.05; not a substitute for the legal text.
- 確認状況
- 原典の税率ファイルと照合済み
7. 必要書類
YELLOW – REVIEW REQUIRED DOC-001 Specialised inspection
- 説明
- Item policy (source, Vietnamese): DM mặt hàng đã được cắt giảm kiểm tra chuyên ngành (765/QĐ-BCT ngày 29/03/2019)*
- 法的根拠
- 765/QĐ-BCT
- 推奨アクション
- Prepare inspection/certification filings under the cited instruments before clearance.
- 確認状況
- 原典で引用された文書。有効性は未確認
- – Goods description, unit price and Incoterm must match the declaration and C/O.
- – Evidence of direct consignment for FTA claims.
- – Declare HS code, tariff schedule code and origin.
- – Supports classification features (material, dimensions, processing level).
- – Trade remedy rates often depend on the specific producer.
8. 推奨される次のアクション
- Prepare inspection/certification filings under the cited instruments before clearance.
- Consider the MFN rate (if the origin qualifies for MFN treatment) instead of preparing FTA origin documents.
- Verify the distinguishing features; consider an advance classification ruling if uncertain.
- Make sure the C/O and documents show a consistent HS code; the source has no old→new correlation table.
- Enter the country of origin to compare preferential schedules.
- Determine the VAT rate by the nature of goods and reduction rules (174/2025/NĐ-CP, Annex I/II).
- Keep evidence of true origin and actual producer.
9. データソースと免責事項
- 税率：BT2026 統合税率表 – BIEU THUE XNK 2026.04.05.xlsx (2026.04.05), 行 11134
- FTA譲許表：ワークシート AC、AT、AJ、VJ、AK、AANZ、AI、VK、VC、EAV、CPTPP、AKH、EV-NK、VNCU、UKV、VI、VNCAM、RCEP A–F
- FTA締約国、国コード：参照データ
- アドバイザリールール、対応付け：アドバイザリーデータ
免責事項: 本レポートは参考情報であり、原典の税率データとアドバイザリールールから生成されています。税関の決定ではなく、HS分類、FTA適用資格、法的有効性を確認するものではありません。利用者は現行法令に照らして確認する必要があります。