Chapter 73 · Articles of iron or steel
7306.30.92
With an internal diameter less than 12.5 mm
- 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- 7306.30 - Other, welded, of circular cross-section, of iron or non-alloy steel:
- - - Other:
- - - - With an internal diameter less than 12.5 mm
Các loại ống, ống dẫn và thanh hình rỗng khác, bằng sắt hoặc thép (ví dụ, nối hở hoặc hàn, tán đinh hoặc ghép bằng cách tương tự) / - Loại khác, được hàn, có mặt cắt ngang hình tròn, bằng sắt hoặc thép không hợp kim: / - - Loại khác: / - - - Với đường kính trong dưới 12,5 mm
Taxes applicable in 2026
Source: consolidated BT2026 tariff (updated 05/04/2026)
Ordinary import duty
15%
15/2023/QĐ-TTg · 15 Jul 2023
Preferential (MFN)
10%
26/2023/NĐ-CP · 15 Jul 2023
VAT
10 / 8 (several rates)
174/2025/NĐ-CP - PL1 · 30/06/20025 (invalid date in source, kept as is)
Excise tax
No data
Environmental tax
No data
Export duty
No data
VAT reduction note: Không được giảm VAT theo 174/2025/NĐ-CP - PL1: Ống và ống dẫn, ống khớp nối các loại bằng Thép > Ống và ống dẫn bằng thép có nối ghép (được hàn, tán bằng đinh, ghép với nhau bằng cách tương tự...). (Tham chiếu mã HS 4 số)
Special preferential (FTA) rates – 2026
| FTA | Rate | Data basis | Proof of origin | Legal basis | Status |
|---|---|---|---|---|---|
| AANZFTA | 0% Lowest published | Consolidated BT2026 2022 - 2027 (một mức cho cả giai đoạn) |
AANZ | 121/2022/NĐ-CP | Ad valorem |
| AJCEP | 0% Lowest published | Consolidated BT2026 01/4/2026 - 31/3/2027 |
AJ | 120/2022/NĐ-CP | Ad valorem |
| ATIGA | 0% Lowest published | Consolidated BT2026 2026 |
D | 126/2022/NĐ-CP | Ad valorem |
| CPTPP | 0% Lowest published | Consolidated BT2026 (VI) |
CPTPP | 115/2022/NĐ-CP | Ad valorem |
| VJEPA | 0% Lowest published | Consolidated BT2026 01/4/2026 - 31/3/2027 |
JV · Form VJ | 124/2022/NĐ-CP | Ad valorem |
| VN-EAEU | 0% Lowest published | Consolidated BT2026 2026 |
EAV | 113/2022/NĐ-CP | Ad valorem |
| VN-LAO | 0% Lowest published | Consolidated BT2026 | S | 206/2025/NĐ-CP | Ad valorem |
| VCFTA | 2% | Consolidated BT2026 2026 |
VC | 112/2022/NĐ-CP | Ad valorem |
| EVFTA | 3.6% | Consolidated BT2026 2026 |
EUR.1 | 116/2022/NĐ-CP | Ad valorem |
| UKVFTA | 3.6% | Consolidated BT2026 2026 |
EUR.1 | 117/2022/NĐ-CP | Ad valorem |
| VIFTA | 7% | Consolidated BT2026 2026 |
Form VI (verify) | 131/2024/NĐ-CP | Ad valorem |
| RCEP (Annex A) BN, KH, ID, LA, MY, MM, PH, SG, TH |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex B) AU |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex C) CN |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex D) JP |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex E) KR |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex F) NZ |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| VKFTA | 10% | Consolidated BT2026 2026 |
VK | 125/2022/NĐ-CP | Ad valorem |
| VN-CAM | No data | No data | S | 56/2026/NĐ-CP | No data |
| VNCU | No data | No data | VNCB · Form VC (Cuba) | 114/2022/NĐ-CP | No data |
| AKFTA | 24% | Consolidated BT2026 2022 - 2027 (một mức cho cả giai đoạn) |
AK | 119/2022/NĐ-CP | Ad valorem |
| ACFTA | 50% | Consolidated BT2026 2022 - 2027 (một mức cho cả giai đoạn) |
E | 118/2022/NĐ-CP | Ad valorem |
| AHKFTA | * not eligible | Consolidated BT2026 2026 |
AHK | 123/2022/NĐ-CP | Not eligible (*) |
| AIFTA | * not eligible | Consolidated BT2026 01/01/2026 - 31/12/2026 |
AI | 122/2022/NĐ-CP | Not eligible (*) |
A published rate does not mean the goods qualify. Origin rules and valid proof of origin are required.
Rate history / phase-down by year
From the 2022–2027 FTA schedule worksheets
| FTA | Periods |
|---|---|
| ACFTA AC · row 10979 |
2022 - 2027 (một mức cho cả giai đoạn)50%
|
| ATIGA AT · row 10930 |
20220%
20230%
20240%
20250%
20260%
20270%
Product-specific rule: RVC40; hoặc CC ngoại trừ từ nhóm 7208, 7209 và 7211 |
| AJCEP AJ · row 10982 |
30/12/2022 - 31/3/20230%
01/4/2023 - 31/3/20240%
01/4/2024 - 31/3/20250%
01/4/2025 - 31/3/20260%
01/4/2026 - 31/3/20270%
01/4/2027 - 31/3/20280%
|
| VJEPA VJ · row 10983 |
30/12/2022 - 31/3/20230%
01/4/2023 - 31/3/20240%
01/4/2024 - 31/3/20250%
01/4/2025 - 31/3/20260%
01/4/2026 - 31/3/20270%
01/4/2027 - 31/3/20280%
|
| AKFTA AK · row 10984 |
2022 - 2027 (một mức cho cả giai đoạn)24%
Rate with exclusions: 24 |
| AANZFTA AANZ · row 10936 |
2022 - 2027 (một mức cho cả giai đoạn)0%
Rate column F (hidden): 0 |
| AIFTA AI · row 10942 |
30/12/2022* not eligible
31/12/2022 - 30/12/2023* not eligible
31/12/2023 - 30/12/2024* not eligible
31/12/2024 - 31/12/2025* not eligible
01/01/2026 - 31/12/2026* not eligible
01/01/2027 - 31/12/2027* not eligible
|
| VKFTA VK · row 10969 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| VCFTA VC · row 11020 |
20224%
20234%
20243%
20253%
20262%
20271%
|
| VN-EAEU EAV · row 11005 |
20220%
20230%
20240%
20250%
20260%
20270%
|
| AHKFTA AKH · row 11005 |
2022* not eligible
2023* not eligible
2024* not eligible
2025* not eligible
2026* not eligible
2027* not eligible
|
| EVFTA EV-NK · row 11022 |
20227.2%
20236.3%
20245.4%
20254.5%
20263.6%
20272.7%
Change flag (helper): X |
| UKVFTA UKV · row 11021 |
20227.2%
20236.3%
20245.4%
20254.5%
20263.6%
20272.7%
Change flag (helper): X |
| CPTPP CPTPP · row 10968 |
(I) → 2021*0%
(II) → 2022*0%
(III) → 2023*0%
(IV) → 2024*0%
(V) → 2025*0%
(VI) → 2026*0%
(VII) → 2027*0%
|
| RCEP A RCEPT-A · row 11005 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP B B · row 11005 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP C C · row 11005 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP D D · row 11004 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP E E · row 11008 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP F F · row 11005 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| VIFTA VI · row 10189 |
20249%
20258%
20267%
20276%
Helper column J: 8 |
* CPTPP periods (I)–(VII) are mapped to years by matching BT2026 (DERIVED data – verify).
Advisory & warnings
General assessment (origin not considered). Run Smart Tariff Advisory for an origin-specific assessment.
YELLOW – REVIEW REQUIRED DOC-001 Specialised inspection
- Description
- Item policy (source, Vietnamese): Chứng nhận chất lượng ATKT và BVMT sau TQ, trước khi đưa ra thị trường (12/2022/TT-BGTVT và 62/2024/TT-BGTVT)
- Legal reference
- 12/2022/TT-BGTVT, 62/2024/TT-BGTVT
- Recommended action
- Prepare inspection/certification filings under the cited instruments before clearance.
- Verification status
- Instrument cited in source; validity not verified
YELLOW – REVIEW REQUIRED DOC-004 Other item policy
- Description
- Item policy (source, Vietnamese): DM HH mua bán, trao đổi qua cửa khẩu phụ, lối mở biên giới của thương nhân (42/2019/TT-BCT, 33/2025/TT-BCT)
- Legal reference
- 42/2019/TT-BCT, 33/2025/TT-BCT
- Recommended action
- Read the referenced instruments.
- Verification status
- Instrument cited in source; validity not verified
YELLOW – REVIEW REQUIRED FTA-013 FTA rate not lower than MFN
- Description
- RCEP (Annex A) 10%, RCEP (Annex B) 10%, RCEP (Annex C) 10%, RCEP (Annex D) 10%, RCEP (Annex E) 10%, RCEP (Annex F) 10%, VKFTA 10%, AKFTA 24%, ACFTA 50%: the preferential rate is equal to or higher than the MFN rate (10%) in the source tariff – claiming the FTA brings no saving.
- Related data
- MFN 10%
- Recommended action
- Consider the MFN rate (if the origin qualifies for MFN treatment) instead of preparing FTA origin documents.
- Verification status
- Not verified – check required
YELLOW – REVIEW REQUIRED HS-003 Classification Review Required – similar lines exist
- Description
- Subheading 7306.30 has 10 lines; 7306.30.92 is distinguished from its siblings by: With an internal diameter less than 12.5 mm.
- Related data
- 7306.30.11 With an external diameter less than 12.5 mm; 7306.30.19 Other; 7306.30.21 With an external diameter less than 12.5 mm; 7306.30.29 Other; 7306.30.30 Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm; 7306.30.41 With an external diameter less than 12.5 mm
- Legal reference
- 31/2022/TT-BTC
- Recommended action
- Verify the distinguishing features; consider an advance classification ruling if uncertain.
- Verification status
- Not verified – check required
YELLOW – REVIEW REQUIRED TAX-001 Several VAT rates
- Description
- The VAT column shows "10/8". Không được giảm VAT theo 174/2025/NĐ-CP - PL1: Ống và ống dẫn, ống khớp nối các loại bằng Thép > Ống và ống dẫn bằng thép có nối ghép (được hàn, tán bằng đinh, ghép với nhau bằng cách tương tự...). (Tham chiếu mã HS 4 số)
- Legal reference
- 174/2025/NĐ-CP - PL1
- Recommended action
- Determine the VAT rate by the nature of goods and reduction rules (174/2025/NĐ-CP, Annex I/II).
- Verification status
- Not verified – check required
GRAY – DATA UNAVAILABLE TR-004 Not Assessed – Additional Regulatory Verification Required
- Description
- The source file records no trade remedy for 7306.30.92. This does NOT mean there is no risk.
- Recommended action
- Check the MOIT Trade Remedies Authority database.
- Verification status
- Not verified – check required
GREEN – VERIFIED DQ-001 MFN rate present in the source
- Description
- The MFN rate 10% for 7306.30.92 was checked against BT2026 (cell BT2026!N11648), basis 26/2023/NĐ-CP.
- Legal reference
- 26/2023/NĐ-CP
- Recommended action
- Verification scope: matched against source file version 2026.04.05; not a substitute for the legal text.
- Verification status
- Checked against the source tariff file
Chapter notes
Notes
1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
(1): Tham khảo TCVN 197-1:2014, TCVN 8855-1:2011 và TCVN 5905:1995
(SEN): Tham khảo Chú giải bổ sung (SEN) của Danh mục Thuế quan hài hòa ASEAN (AHTN) 2022