SECTION XV · Chapter 73
Articles of iron or steel
Nomenclature and 2026 rates from the consolidated BT2026 tariff. SOURCE
Chapter notes (5)
Notes
1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
(1): Tham khảo TCVN 197-1:2014, TCVN 8855-1:2011 và TCVN 5905:1995
(SEN): Tham khảo Chú giải bổ sung (SEN) của Danh mục Thuế quan hài hòa ASEAN (AHTN) 2022
| HS code | Description | Unit | Ordinary import duty | MFN | VAT |
|---|---|---|---|---|---|
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel | ||||
| 7301.10.00 | - Sheet piling | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7301.20.00 | - Angles, shapes and sections | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7302 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails | ||||
| 7302.10.00 | - Rails | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7302.30.00 | - Switch blades, crossing frogs, point rods and other crossing pieces | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7302.40.00 | - Fish-plates and sole plates | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7302.90 | - Other: | ||||
| 7302.90.10 | - - Sleepers (cross-ties) | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7302.90.90 | - - Other | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7303 | Tubes, pipes and hollow profiles, of cast iron | ||||
| - Tubes and pipes: | |||||
| 7303.00.11 | - - Hubless tubes and pipes | kg | 15% | 10% | 10 / 8 (several rates) |
| 7303.00.19 | - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| - Other: | |||||
| 7303.00.91 | - - With an external diameter not exceeding 100 mm | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7303.00.99 | - - Other | kg | 4.5% | 3% | 10 / 8 (several rates) |
| 7304 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel | ||||
| - Line pipe of a kind used for oil or gas pipelines: | |||||
| 7304.11.00 | - - Of stainless steel | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.19.00 | - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: | |||||
| 7304.22 | - - Drill pipe of stainless steel: | ||||
| 7304.22.10 | - - - With a yield strength less than 80,000 psi, without threaded end | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.22.90 | - - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.23 | - - Other drill pipe: | ||||
| 7304.23.10 | - - - With a yield strength less than 80,000 psi, without threaded end | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.23.90 | - - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.24 | - - Other, of stainless steel: | ||||
| 7304.24.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7304.24.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.24.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.29 | - - Other: | ||||
| 7304.29.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7304.29.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.29.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | kg | 5% | 0% | 10 / 8 (several rates) |
| - Other, of circular cross-section, of iron or non-alloy steel: | |||||
| 7304.31 | - - Cold-drawn or cold-rolled (cold - reduced): | ||||
| 7304.31.10 | - - - Drillrod casing and tubing with pin and box threads | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7304.31.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.31.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | kg | 15% | 10% | 10 / 8 (several rates) |
| 7304.31.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7304.39 | - - Other: | ||||
| 7304.39.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.39.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | kg | 15% | 10% | 10 / 8 (several rates) |
| 7304.39.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - Other, of circular cross-section, of stainless steel: | |||||
| 7304.41.00 | - - Cold-drawn or cold-rolled (cold-reduced) | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.49.00 | - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| - Other, of circular cross-section, of other alloy steel: | |||||
| 7304.51 | - - Cold-drawn or cold-rolled (cold-reduced): | ||||
| 7304.51.10 | - - - Drillrod casing and tubing with pin and box threads | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.51.20 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.51.90 | - - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.59 | - - Other: | ||||
| 7304.59.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.59.90 | - - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.90 | - Other: | ||||
| 7304.90.10 | - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (several rates) |
| 7304.90.30 | - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | kg | 15% | 10% | 10 / 8 (several rates) |
| 7304.90.90 | - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7305 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel | ||||
| - Line pipe of a kind used for oil or gas pipelines: | |||||
| 7305.11.00 | - - Longitudinally submerged arc welded | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7305.12 | - - Other, longitudinally welded: | ||||
| 7305.12.10 | - - - Electric resistance welded (ERW) | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7305.12.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7305.19 | - - Other: | ||||
| 7305.19.10 | - - - Spiral or helical submerged arc welded | kg | 15% | 10% | 10 / 8 (several rates) |
| 7305.19.90 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7305.20.00 | - Casing of a kind used in drilling for oil or gas | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - Other, welded: | |||||
| 7305.31 | - - Longitudinally welded: | ||||
| 7305.31.10 | - - - Stainless steel pipes and tubes | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7305.31.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7305.39 | - - Other: | ||||
| 7305.39.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 15% | 10% | 10 / 8 (several rates) |
| 7305.39.90 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7305.90.00 | - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel | ||||
| - Line pipe of a kind used for oil or gas pipelines: | |||||
| 7306.11 | - - Welded, of stainless steel: | ||||
| 7306.11.10 | - - - Longitudinally electric resistance welded (ERW) | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.11.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.19 | - - Other: | ||||
| 7306.19.10 | - - - Longitudinally electric resistance welded (ERW) | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.19.20 | - - - Spiral or helical submerged arc welded | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.19.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - Casing and tubing of a kind used in drilling for oil or gas: | |||||
| 7306.21.00 | - - Welded, of stainless steel | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.29.00 | - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.30 | - Other, welded, of circular cross-section, of iron or non-alloy steel: | ||||
| - - Boiler tubes: | |||||
| 7306.30.11 | - - - With an external diameter less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.30.19 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| - - Copper-plated, fluororesin-coated or zinc-chromated steel tubes with an external diameter not exceeding 15 mm: | |||||
| 7306.30.21 | - - - With an external diameter less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.30.29 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.30.30 | - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| - - High-pressure pipe with a yield strength not less than 42,000 psi: | |||||
| 7306.30.41 | - - - With an external diameter less than 12.5 mm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.30.49 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - - Other: | |||||
| 7306.30.91 | - - - With an internal diameter of 12.5 mm or more, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.30.92 | - - - With an internal diameter less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.30.99 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.40 | - Other, welded, of circular cross-section, of stainless steel: | ||||
| - - Boiler tubes: | |||||
| 7306.40.11 | - - - With an external diameter not exceeding 12.5 mm | kg | 10.5% | 7% | 10 / 8 (several rates) |
| 7306.40.19 | - - - Other | kg | 10.5% | 7% | 10 / 8 (several rates) |
| 7306.40.20 | - - Stainless steel pipes and tubes, with an external diameter exceeding 105 mm | kg | 10.5% | 7% | 10 / 8 (several rates) |
| 7306.40.30 | - - Pipes and tubes containing by weight at least 30% of nickel, with an external diameter not exceeding 10 mm | kg | 10.5% | 7% | 10 / 8 (several rates) |
| 7306.40.90 | - - Other | kg | 5% | 0% | 10 / 8 (several rates) |
| 7306.50 | - Other, welded, of circular cross-section, of other alloy steel: | ||||
| - - Boiler tubes: | |||||
| 7306.50.11 | - - - With an external diameter less than 12.5 mm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.50.19 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - - Other: | |||||
| 7306.50.91 | - - - With an external diameter less than 12.5 mm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.50.99 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - Other, welded, of non-circular cross-section: | |||||
| 7306.61 | - - Of square or rectangular cross-section: | ||||
| 7306.61.10 | - - - With an external diagonal cross-section less than 12.5 mm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.61.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.69 | - - Of other non-circular cross-section: | ||||
| 7306.69.10 | - - - With an external diagonal cross-section less than 12.5 mm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.69.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7306.90 | - Other: | ||||
| - - Copper brazed pipes and tubes: | |||||
| 7306.90.11 | - - - With an external diagonal cross-section less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.90.19 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| - - Other: | |||||
| 7306.90.91 | - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.90.94 | - - - Other high pressure pipes, with an external diameter of less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.90.95 | - - - Other high pressure pipes, with an external diameter of 12.5 mm or more | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.90.96 | - - - Other, with an external diagonal cross-section less than 12.5 mm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.90.97 | - - - Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | kg | 15% | 10% | 10 / 8 (several rates) |
| 7306.90.99 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7307 | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel | ||||
| - Cast fittings: | |||||
| 7307.11 | - - Of non-malleable cast iron: | ||||
| 7307.11.10 | - - - Hubless tube or pipe fittings | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.11.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.19.00 | - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - Other, of stainless steel: | |||||
| 7307.21 | - - Flanges: | ||||
| 7307.21.10 | - - - Having an internal diameter of less than 15 cm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.21.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.22 | - - Threaded elbows, bends and sleeves: | ||||
| 7307.22.10 | - - - Having an internal diameter of less than 15 cm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7307.22.90 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7307.23 | - - Butt welding fittings: | ||||
| 7307.23.10 | - - - Having an internal diameter of less than 15 cm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.23.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.29 | - - Other: | ||||
| 7307.29.10 | - - - Having an internal diameter of less than 15 cm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.29.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| - Other: | |||||
| 7307.91 | - - Flanges: | ||||
| 7307.91.10 | - - - Having an internal diameter of less than 15 cm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.91.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.92 | - - Threaded elbows, bends and sleeves: | ||||
| 7307.92.10 | - - - Having an internal diameter of less than 15 cm | kg | 15% | 10% | 10 / 8 (several rates) |
| 7307.92.90 | - - - Other | kg | 15% | 10% | 10 / 8 (several rates) |
| 7307.93 | - - Butt welding fittings: | ||||
| 7307.93.10 | - - - Having an internal diameter of less than 15 cm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.93.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.99 | - - Other: | ||||
| 7307.99.10 | - - - Having an internal diameter of less than 15 cm | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7307.99.90 | - - - Other | kg | 7.5% | 5% | 10 / 8 (several rates) |
| 7308 | Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel | ||||
| 7308.10 | - Bridges and bridge-sections: | ||||
| 7308.10.10 | - - Prefabricated modular type joined by shear connectors | kg | 5% | 0% | 8 / 10 (several rates) |
| 7308.10.90 | - - Other | kg | 4.5% | 3% | 8 / 10 (several rates) |
| 7308.20 | - Towers and lattice masts: | ||||
| - - Towers: | |||||
| 7308.20.11 | - - - Prefabricated modular type joined by shear connectors | kg | 4.5% | 3% | 8 / 10 (several rates) |
| 7308.20.19 | - - - Other | kg | 4.5% | 3% | 8 / 10 (several rates) |
| - - Lattice masts: | |||||
| 7308.20.21 | - - - Prefabricated modular type joined by shear connectors | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7308.20.29 | - - - Other | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7308.30 | - Doors, windows and their frames and thresholds for doors: | ||||
| 7308.30.10 | - - Doors, of a thickness of 6 mm or more but not exceeding 8 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7308.30.90 | - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7308.40 | - Equipment for scaffolding, shuttering, propping or pit-propping: | ||||
| 7308.40.10 | - - Prefabricated modular type joined by shear connectors | kg | 4.5% | 3% | 8 / 10 (several rates) |
| 7308.40.90 | - - Other | kg | 4.5% | 3% | 8 / 10 (several rates) |
| 7308.90 | - Other: | ||||
| 7308.90.20 | - - Prefabricated modular type joined by shear connectors | kg | 15% | 10% | 8 / 10 (several rates) |
| 7308.90.40 | - - Corrugated and curved galvanised plates or sheets prepared for use in conduits, culverts or tunnels | kg | 15% | 10% | 8 / 10 (several rates) |
| 7308.90.50 | - - Rails for ships | kg | 15% | 10% | 8 / 10 (several rates) |
| 7308.90.60 | - - Perforated cable trays | kg | 15% | 10% | 8 / 10 (several rates) |
| - - Other: | |||||
| 7308.90.92 | - - - Guardrails | kg | 15% | 10% | 8 / 10 (several rates) |
| 7308.90.99 | - - - Other | kg | 15% | 10% | 8 / 10 (several rates) |
| 7309 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | ||||
| - Of a kind used for the conveyance or packing of goods: | |||||
| 7309.00.11 | - - Lined or heat-insulated | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7309.00.19 | - - Other | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| - Other: | |||||
| 7309.00.91 | - - Lined or heat-insulated | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7309.00.99 | - - Other | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | ||||
| 7310.10 | - Of a capacity of 50 l or more: | ||||
| 7310.10.10 | - - Of tinplate | kg/unit | 18% | 12% | 8 / 10 (several rates) |
| - - Other: | |||||
| 7310.10.91 | - - - Casting, forging or stamping, in the rough state | kg/unit | 18% | 12% | 8 / 10 (several rates) |
| 7310.10.99 | - - - Other | kg/unit | 18% | 12% | 8 / 10 (several rates) |
| - Of a capacity of less than 50 l: | |||||
| 7310.21 | - - Cans which are to be closed by soldering or crimping: | ||||
| - - - Of a capacity of less than 1 l: | |||||
| 7310.21.11 | - - - - Of tinplate | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7310.21.19 | - - - - Other | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| - - - Other: | |||||
| 7310.21.91 | - - - - Of tinplate | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7310.21.99 | - - - - Other | kg/unit | 18% | 12% | 8 / 10 (several rates) |
| 7310.29 | - - Other: | ||||
| - - - Of a capacity of less than 1 l: | |||||
| 7310.29.11 | - - - - Of tinplate | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7310.29.19 | - - - - Other | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| - - - Other: | |||||
| 7310.29.91 | - - - - Of tinplate | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7310.29.92 | - - - - Other casting, forging or stamping, in the rough state | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7310.29.99 | - - - - Other | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7311 | Containers for compressed or liquefied gas, of iron or steel | ||||
| - Seamless steel cylinders: | |||||
| 7311.00.21 | - - Of a capacity of 30 l or more, but less than 110 l, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7311.00.22 | - - Of a capacity of 110 l or more, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | kg/unit | 5% | 0% | 8 / 10 (several rates) |
| 7311.00.23 | - - Of a capacity of less than 30 l, for Liquefied Petroleum Gas (LPG) | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7311.00.24 | - - Of a capacity of 30 l or more, but less than 110 l, for Liquefied Petroleum Gas (LPG) | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7311.00.25 | - - Other, for Liquefied Petroleum Gas (LPG) | kg/unit | 5% | 0% | 8 / 10 (several rates) |
| 7311.00.26 | - - Other, of a capacity of less than 30 l | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7311.00.27 | - - Other, of a capacity of 30 l or more, but less than 110 l | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7311.00.29 | - - Other | kg/unit | 5% | 0% | 8 / 10 (several rates) |
| - Other: | |||||
| 7311.00.91 | - - Of a capacity not exceeding 7.3 l | kg/unit | 25.5% | 17% | 8 / 10 (several rates) |
| 7311.00.92 | - - Of a capacity more than 7.3 l but less than 30 l | kg/unit | 25.5% | 17% | 8 / 10 (several rates) |
| 7311.00.94 | - - Of a capacity of 30 l or more, but less than 110 l | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7311.00.99 | - - Other | kg/unit | 5% | 0% | 8 / 10 (several rates) |
| 7312 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated | ||||
| 7312.10 | - Stranded wire, ropes and cables: | ||||
| 7312.10.10 | - - Locked coils, flattened strands and non-rotating wire ropes | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7312.10.20 | - - Plated or coated with brass and of a diameter not exceeding 3 mm | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7312.10.30 | - - Plated or coated with aluminium | kg | 7.5% | 5% | 8 / 10 (several rates) |
| - - Other: | |||||
| 7312.10.91 | - - - Stranded steel wire for prestressing concrete | kg | 4.5% | 3% | 8 / 10 (several rates) |
| 7312.10.99 | - - - Other | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7312.90.00 | - Other | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7313.00.00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | kg | 45% | 30% | 8 / 10 (several rates) |
| 7314 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel | ||||
| - Woven cloth: | |||||
| 7314.12.00 | - - Endless bands for machinery, of stainless steel | kg | 22.5% | 15% | 8 / 10 (several rates) |
| 7314.14.00 | - - Other woven cloth, of stainless steel | kg | 22.5% | 15% | 8 / 10 (several rates) |
| 7314.19 | - - Other: | ||||
| 7314.19.10 | - - - Endless bands for machinery other than of stainless steel | kg | 22.5% | 15% | 8 / 10 (several rates) |
| 7314.19.90 | - - - Other | kg | 22.5% | 15% | 8 / 10 (several rates) |
| 7314.20.00 | - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | kg | 22.5% | 15% | 8 / 10 (several rates) |
| - Other grill, netting and fencing, welded at the intersection: | |||||
| 7314.31.00 | - - Plated or coated with zinc | kg | 30% | 20% | 8 / 10 (several rates) |
| 7314.39.00 | - - Other | kg | 30% | 20% | 8 / 10 (several rates) |
| - Other cloth, grill, netting and fencing: | |||||
| 7314.41.00 | - - Plated or coated with zinc | kg | 45% | 30% | 8 / 10 (several rates) |
| 7314.42.00 | - - Coated with plastics | kg | 45% | 30% | 8 / 10 (several rates) |
| 7314.49.00 | - - Other | kg | 45% | 30% | 8 / 10 (several rates) |
| 7314.50.00 | - Expanded metal | kg | 30% | 20% | 8 / 10 (several rates) |
| 7315 | Chain and parts thereof, of iron or steel | ||||
| - Articulated link chain and parts thereof: | |||||
| 7315.11 | - - Roller chain: | ||||
| 7315.11.10 | - - - Bicycle or motorcycle chain | kg/unit | 52.5% | 35% | 8 / 10 (several rates) |
| - - - Other: | |||||
| 7315.11.91 | - - - - Transmission type, of a pitch length of not less than 6 mm and not more than 32 mm | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.11.99 | - - - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.12 | - - Other chain: | ||||
| 7315.12.10 | - - - Bicycle or motorcycle chain | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.12.90 | - - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.19 | - - Parts: | ||||
| 7315.19.10 | - - - Of bicycle or motorcycle chain | kg/unit | 52.5% | 35% | 8 / 10 (several rates) |
| 7315.19.90 | - - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.20.00 | - Skid chain | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| - Other chain: | |||||
| 7315.81.00 | - - Stud-link | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.82.00 | - - Other, welded link | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.89 | - - Other: | ||||
| 7315.89.10 | - - - Bicycle or motorcycle chain | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7315.89.90 | - - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7315.90 | - Other parts: | ||||
| 7315.90.20 | - - Of bicycle or motorcycle chain | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7315.90.90 | - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7316.00.00 | Anchors, grapnels and parts thereof, of iron or steel | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7317 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper | ||||
| 7317.00.10 | - Wire nails | kg | 30% | 20% | 8 / 10 (several rates) |
| 7317.00.20 | - Staples | kg | 30% | 20% | 8 / 10 (several rates) |
| 7317.00.30 | - Dog spikes for rail sleepers; gang nails | kg | 30% | 20% | 8 / 10 (several rates) |
| 7317.00.90 | - Other | kg | 30% | 20% | 8 / 10 (several rates) |
| 7318 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel | ||||
| - Threaded articles: | |||||
| 7318.11.00 | - - Coach screws | kg | 7.5% | 5% | 8 / 10 (several rates) |
| 7318.12 | - - Other wood screws: | ||||
| 7318.12.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.12.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.13.00 | - - Screw hooks and screw rings | kg | 15% | 10% | 8 / 10 (several rates) |
| 7318.14 | - - Self-tapping screws: | ||||
| 7318.14.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.14.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.15 | - - Other screws and bolts, whether or not with their nuts or washers: | ||||
| 7318.15.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.15.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.16 | - - Nuts: | ||||
| 7318.16.10 | - - - For bolts having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.16.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.19 | - - Other: | ||||
| 7318.19.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.19.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| - Non-threaded articles: | |||||
| 7318.21.00 | - - Spring washers and other lock washers | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.22.00 | - - Other washers | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.23 | - - Rivets: | ||||
| 7318.23.10 | - - - Having an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.23.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.24.00 | - - Cotters and cotter-pins | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.29 | - - Other: | ||||
| 7318.29.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (several rates) |
| 7318.29.90 | - - - Other | kg | 18% | 12% | 8 / 10 (several rates) |
| 7319 | Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included | ||||
| 7319.40 | - Safety pins and other pins: | ||||
| 7319.40.10 | - - Safety pins | kg | 45% | 30% | 8 / 10 (several rates) |
| 7319.40.20 | - - Other pins | kg | 45% | 30% | 8 / 10 (several rates) |
| 7319.90 | - Other: | ||||
| 7319.90.10 | - - Sewing, darning or embroidery needles | kg | 45% | 30% | 8 / 10 (several rates) |
| 7319.90.90 | - - Other | kg | 45% | 30% | 8 / 10 (several rates) |
| 7320 | Springs and leaves for springs, of iron or steel | ||||
| 7320.10 | - Leaf-springs and leaves therefor: | ||||
| - - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30: | |||||
| 7320.10.11 | - - - Suitable for use on motor vehicles of heading 87.02, 87.03 or 87.04 | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7320.10.12 | - - - Suitable for use on other motor vehicles | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.10.19 | - - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.10.90 | - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.20 | - Helical springs: | ||||
| - - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30: | |||||
| 7320.20.11 | - - - For motor vehicles | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.20.12 | - - - For earth-moving machinery | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.20.19 | - - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.20.90 | - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.90 | - Other: | ||||
| 7320.90.10 | - - Suitable for use on motor vehicles | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7320.90.90 | - - Other | kg/unit | 4.5% | 3% | 8 / 10 (several rates) |
| 7321 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel | ||||
| - Cooking appliances and plate warmers: | |||||
| 7321.11.00 | - - For gas fuel or for both gas and other fuels | unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7321.12.00 | - - For liquid fuel | unit | 30% | 20% | 8 / 10 (several rates) |
| 7321.19 | - - Other, including appliances for solid fuel: | ||||
| 7321.19.10 | - - - For solid fuel | unit | 30% | 20% | 8 / 10 (several rates) |
| 7321.19.90 | - - - Other | unit | 30% | 20% | 8 / 10 (several rates) |
| - Other appliances: | |||||
| 7321.81.00 | - - For gas fuel or for both gas and other fuels | unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7321.82.00 | - - For liquid fuel | unit | 37.5% | 25% | 8 / 10 (several rates) |
| 7321.89.00 | - - Other, including appliances for solid fuel | unit | 37.5% | 25% | 8 / 10 (several rates) |
| 7321.90 | - Parts: | ||||
| 7321.90.10 | - - Of kerosene stoves | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| - - Of cooking appliances and plate warmers using gas fuel: | |||||
| 7321.90.21 | - - - Burner; components made by stamping or pressing processes | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7321.90.29 | - - - Other | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7321.90.90 | - - Other | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7322 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor- driven fan or blower, and parts thereof, of iron or steel | ||||
| - Radiators and parts thereof: | |||||
| 7322.11.00 | - - Of cast iron | kg/unit | 40.5% | 27% | 8 / 10 (several rates) |
| 7322.19.00 | - - Other | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7322.90.00 | - Other | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7323 | Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel | ||||
| 7323.10.00 | - Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | kg/unit | 37.5% | 25% | 8 / 10 (several rates) |
| - Other: | |||||
| 7323.91 | - - Of cast iron, not enamelled: | ||||
| 7323.91.10 | - - - Kitchenware | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.91.20 | - - - Ashtrays | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.91.90 | - - - Other | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.92.00 | - - Of cast iron, enamelled | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.93 | - - Of stainless steel: | ||||
| 7323.93.10 | - - - Kitchenware | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.93.20 | - - - Ashtrays | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.93.90 | - - - Other | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.94.00 | - - Of iron (other than cast iron) or steel, enamelled | kg/unit | 45% | 30% | 8 / 10 (several rates) |
| 7323.99 | - - Other: | ||||
| 7323.99.10 | - - - Kitchenware | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7323.99.20 | - - - Ashtrays | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7323.99.90 | - - - Other | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7324 | Sanitary ware and parts thereof, of iron or steel | ||||
| 7324.10 | - Sinks and wash basins, of stainless steel: | ||||
| 7324.10.10 | - - Kitchen sinks | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7324.10.90 | - - Other | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| - Baths: | |||||
| 7324.21 | - - Of cast iron, whether or not enamelled: | ||||
| 7324.21.10 | - - - Bathtubs having rectangular or oblong interior shape | kg/unit | 52.5% | 35% | 8 / 10 (several rates) |
| 7324.21.90 | - - - Other | kg/unit | 52.5% | 35% | 8 / 10 (several rates) |
| 7324.29 | - - Other: | ||||
| 7324.29.10 | - - - Bathtubs having rectangular or oblong interior shape | kg/unit | 52.5% | 35% | 8 / 10 (several rates) |
| 7324.29.90 | - - - Other | kg/unit | 52.5% | 35% | 8 / 10 (several rates) |
| 7324.90 | - Other, including parts: | ||||
| 7324.90.10 | - - Flushing water closets or urinals (fixed type) | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| - - Other: | |||||
| 7324.90.91 | - - - Parts of kitchen sinks or bathtubs | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7324.90.93 | - - - Parts of flushing water closets or urinals (fixed type) | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7324.90.99 | - - - Other | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7325 | Other cast articles of iron or steel | ||||
| 7325.10 | - Of non-malleable cast iron: | ||||
| 7325.10.20 | - - Manhole covers, gratings and frames therefor | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7325.10.30 | - - Spouts and cups for latex collection | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7325.10.90 | - - Other | kg/unit | 22.5% | 15% | 10 / 8 (several rates) |
| - Other: | |||||
| 7325.91.00 | - - Grinding balls and similar articles for mills | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7325.99 | - - Other: | ||||
| 7325.99.20 | - - - Manhole covers, gratings and frames therefor | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7325.99.90 | - - - Other | kg/unit | 30% | 20% | 10 / 8 (several rates) |
| 7326 | Other articles of iron or steel | ||||
| - Forged or stamped, but not further worked: | |||||
| 7326.11.00 | - - Grinding balls and similar articles for mills | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7326.19.00 | - - Other | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7326.20 | - Articles of iron or steel wire: | ||||
| 7326.20.50 | - - Poultry cages and the like | kg/unit | 30% | 20% | 8 / 10 (several rates) |
| 7326.20.60 | - - Rat traps | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7326.20.70 | - - Wire mesh curtain and blinds | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7326.20.90 | - - Other | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7326.90 | - Other: | ||||
| 7326.90.10 | - - Ships' rudders | kg/unit | 7.5% | 5% | 8 / 10 (several rates) |
| 7326.90.20 | - - Spouts and cups for latex collection | kg/unit | 15% | 10% | 8 / 10 (several rates) |
| 7326.90.30 | - - Stainless steel clamp assemblies with rubber sleeves of a kind used for hubless cast iron pipes and pipe fittings | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7326.90.60 | - - Bunsen burners | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7326.90.70 | - - Horseshoes; riding boot spurs | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| - - Other: | |||||
| 7326.90.91 | - - - Cigarette cases and boxes | kg/unit | 22.5% | 15% | 8 / 10 (several rates) |
| 7326.90.99 | - - - Other | kg/unit | 15% | 10% | 10 / 8 (several rates) |