Chapter 73 · Articles of iron or steel
7306.90.91
High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm
- 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- 7306.90 - Other:
- - - Other:
- - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm
Các loại ống, ống dẫn và thanh hình rỗng khác, bằng sắt hoặc thép (ví dụ, nối hở hoặc hàn, tán đinh hoặc ghép bằng cách tương tự) / - Loại khác: / - - Loại khác: / - - - Ống dẫn chịu áp lực cao có giới hạn chảy (1) không nhỏ hơn 42.000 psi, đường kính trong nhỏ hơn 12,5 mm
Taxes applicable in 2026
Source: consolidated BT2026 tariff (updated 05/04/2026)VAT reduction note: Không được giảm VAT theo 174/2025/NĐ-CP - PL1: Ống và ống dẫn, ống khớp nối các loại bằng Thép > Ống và ống dẫn bằng thép có nối ghép (được hàn, tán bằng đinh, ghép với nhau bằng cách tương tự...). (Tham chiếu mã HS 4 số)
Special preferential (FTA) rates – 2026
| FTA | Rate | Data basis | Proof of origin | Legal basis | Status |
|---|---|---|---|---|---|
| ACFTA | 0% Lowest published | Consolidated BT2026 2022 - 2027 (một mức cho cả giai đoạn) |
E | 118/2022/NĐ-CP | Ad valorem |
| AJCEP | 0% Lowest published | Consolidated BT2026 01/4/2026 - 31/3/2027 |
AJ | 120/2022/NĐ-CP | Ad valorem |
| AKFTA | 0% (except ID, MM, MY, PH) Lowest published | Consolidated BT2026 2022 - 2027 (một mức cho cả giai đoạn) |
AK | 119/2022/NĐ-CP | Ad valorem |
| ATIGA | 0% Lowest published | Consolidated BT2026 2026 |
D | 126/2022/NĐ-CP | Ad valorem |
| CPTPP | 0% Lowest published | Consolidated BT2026 (VI) |
CPTPP | 115/2022/NĐ-CP | Ad valorem |
| VJEPA | 0% Lowest published | Consolidated BT2026 01/4/2026 - 31/3/2027 |
JV · Form VJ | 124/2022/NĐ-CP | Ad valorem |
| VKFTA | 0% Lowest published | Consolidated BT2026 2026 |
VK | 125/2022/NĐ-CP | Ad valorem |
| VN-EAEU | 0% Lowest published | Consolidated BT2026 2026 |
EAV | 113/2022/NĐ-CP | Ad valorem |
| VN-LAO | 0% Lowest published | Consolidated BT2026 | S | 206/2025/NĐ-CP | Ad valorem |
| VCFTA | 3% | Consolidated BT2026 2026 |
VC | 112/2022/NĐ-CP | Ad valorem |
| EVFTA | 3.6% | Consolidated BT2026 2026 |
EUR.1 | 116/2022/NĐ-CP | Ad valorem |
| UKVFTA | 3.6% | Consolidated BT2026 2026 |
EUR.1 | 117/2022/NĐ-CP | Ad valorem |
| AANZFTA | 5% | Consolidated BT2026 2022 - 2027 (một mức cho cả giai đoạn) |
AANZ | 121/2022/NĐ-CP | Ad valorem |
| VIFTA | 4% | Consolidated BT2026 2026 |
Form VI (verify) | 131/2024/NĐ-CP | Ad valorem |
| RCEP (Annex A) BN, KH, ID, LA, MY, MM, PH, SG, TH |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex B) AU |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex C) CN |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex D) JP |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex E) KR |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| RCEP (Annex F) NZ |
10% | Consolidated BT2026 2026 |
RCEP Form / Declaration of origin | 129/2022/NĐ-CP | Ad valorem |
| VN-CAM | No data | No data | S | 56/2026/NĐ-CP | No data |
| VNCU | No data | No data | VNCB · Form VC (Cuba) | 114/2022/NĐ-CP | No data |
| AHKFTA | * not eligible | Consolidated BT2026 2026 |
AHK | 123/2022/NĐ-CP | Not eligible (*) |
| AIFTA | * not eligible | Consolidated BT2026 01/01/2026 - 31/12/2026 |
AI | 122/2022/NĐ-CP | Not eligible (*) |
A published rate does not mean the goods qualify. Origin rules and valid proof of origin are required.
Rate history / phase-down by year
From the 2022–2027 FTA schedule worksheets
| FTA | Periods |
|---|---|
| ACFTA AC · row 11015 |
2022 - 2027 (một mức cho cả giai đoạn)0%
|
| ATIGA AT · row 10958 |
20220%
20230%
20240%
20250%
20260%
20270%
Product-specific rule: Bằng thép: RVC40; hoặc CC ngoại trừ từ nhóm 7208,7209 và 7211; Bằng thép không gỉ: RVC40 hoặc CC |
| AJCEP AJ · row 11010 |
30/12/2022 - 31/3/20230%
01/4/2023 - 31/3/20240%
01/4/2024 - 31/3/20250%
01/4/2025 - 31/3/20260%
01/4/2026 - 31/3/20270%
01/4/2027 - 31/3/20280%
|
| VJEPA VJ · row 11011 |
30/12/2022 - 31/3/20230%
01/4/2023 - 31/3/20240%
01/4/2024 - 31/3/20250%
01/4/2025 - 31/3/20260%
01/4/2026 - 31/3/20270%
01/4/2027 - 31/3/20280%
|
| AKFTA AK · row 11012 |
2022 - 2027 (một mức cho cả giai đoạn)0%
Excluded countries: ID, MM, MY, PH Rate with exclusions: 0(-ID, MM, MY, PH) |
| AANZFTA AANZ · row 10964 |
2022 - 2027 (một mức cho cả giai đoạn)5%
Rate column F (hidden): 5 |
| AIFTA AI · row 10970 |
30/12/2022* not eligible
31/12/2022 - 30/12/2023* not eligible
31/12/2023 - 30/12/2024* not eligible
31/12/2024 - 31/12/2025* not eligible
01/01/2026 - 31/12/2026* not eligible
01/01/2027 - 31/12/2027* not eligible
|
| VKFTA VK · row 10999 |
20220%
20230%
20240%
20250%
20260%
20270%
|
| VCFTA VC · row 11048 |
20227%
20236%
20245%
20254%
20263%
20272%
|
| VN-EAEU EAV · row 11033 |
20222.7%
20231.8%
20240.9%
20250%
20260%
20270%
|
| AHKFTA AKH · row 11033 |
2022* not eligible
2023* not eligible
2024* not eligible
2025* not eligible
2026* not eligible
2027* not eligible
|
| EVFTA EV-NK · row 11050 |
20227.2%
20236.3%
20245.4%
20254.5%
20263.6%
20272.7%
Change flag (helper): X |
| UKVFTA UKV · row 11049 |
20227.2%
20236.3%
20245.4%
20254.5%
20263.6%
20272.7%
Change flag (helper): X |
| CPTPP CPTPP · row 10996 |
(I) → 2021*0%
(II) → 2022*0%
(III) → 2023*0%
(IV) → 2024*0%
(V) → 2025*0%
(VI) → 2026*0%
(VII) → 2027*0%
|
| RCEP A RCEPT-A · row 11033 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP B B · row 11033 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP C C · row 11033 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP D D · row 11032 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP E E · row 11036 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| RCEP F F · row 11033 |
202210%
202310%
202410%
202510%
202610%
202710%
|
| VIFTA VI · row 10217 |
20248%
20256%
20264%
20272%
Helper column J: 8 |
* CPTPP periods (I)–(VII) are mapped to years by matching BT2026 (DERIVED data – verify).
Advisory & warnings
General assessment (origin not considered). Run Smart Tariff Advisory for an origin-specific assessment.
YELLOW – REVIEW REQUIRED DOC-001 Specialised inspection
- Description
- Item policy (source, Vietnamese): Chứng nhận chất lượng ATKT và BVMT sau TQ, trước khi đưa ra thị trường (12/2022/TT-BGTVT và 62/2024/TT-BGTVT)
- Legal reference
- 12/2022/TT-BGTVT, 62/2024/TT-BGTVT
- Recommended action
- Prepare inspection/certification filings under the cited instruments before clearance.
- Verification status
- Instrument cited in source; validity not verified
YELLOW – REVIEW REQUIRED DOC-004 Other item policy
- Description
- Item policy (source, Vietnamese): DM HH mua bán, trao đổi qua cửa khẩu phụ, lối mở biên giới của thương nhân (42/2019/TT-BCT, 33/2025/TT-BCT)
- Legal reference
- 42/2019/TT-BCT, 33/2025/TT-BCT
- Recommended action
- Read the referenced instruments.
- Verification status
- Instrument cited in source; validity not verified
YELLOW – REVIEW REQUIRED FTA-013 FTA rate not lower than MFN
- Description
- RCEP (Annex A) 10%, RCEP (Annex B) 10%, RCEP (Annex C) 10%, RCEP (Annex D) 10%, RCEP (Annex E) 10%, RCEP (Annex F) 10%: the preferential rate is equal to or higher than the MFN rate (10%) in the source tariff – claiming the FTA brings no saving.
- Related data
- MFN 10%
- Recommended action
- Consider the MFN rate (if the origin qualifies for MFN treatment) instead of preparing FTA origin documents.
- Verification status
- Not verified – check required
YELLOW – REVIEW REQUIRED HS-003 Classification Review Required – similar lines exist
- Description
- Subheading 7306.90 has 8 lines; 7306.90.91 is distinguished from its siblings by: High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm.
- Related data
- 7306.90.11 With an external diagonal cross-section less than 12.5 mm; 7306.90.19 Other; 7306.90.94 Other high pressure pipes, with an external diameter of less than 12.5 mm; 7306.90.95 Other high pressure pipes, with an external diameter of 12.5 mm or more; 7306.90.96 Other, with an external diagonal cross-section less than 12.5 mm; 7306.90.97 Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon
- Legal reference
- 31/2022/TT-BTC
- Recommended action
- Verify the distinguishing features; consider an advance classification ruling if uncertain.
- Verification status
- Not verified – check required
YELLOW – REVIEW REQUIRED TAX-001 Several VAT rates
- Description
- The VAT column shows "10/8". Không được giảm VAT theo 174/2025/NĐ-CP - PL1: Ống và ống dẫn, ống khớp nối các loại bằng Thép > Ống và ống dẫn bằng thép có nối ghép (được hàn, tán bằng đinh, ghép với nhau bằng cách tương tự...). (Tham chiếu mã HS 4 số)
- Legal reference
- 174/2025/NĐ-CP - PL1
- Recommended action
- Determine the VAT rate by the nature of goods and reduction rules (174/2025/NĐ-CP, Annex I/II).
- Verification status
- Not verified – check required
GRAY – DATA UNAVAILABLE TR-004 Not Assessed – Additional Regulatory Verification Required
- Description
- The source file records no trade remedy for 7306.90.91. This does NOT mean there is no risk.
- Recommended action
- Check the MOIT Trade Remedies Authority database.
- Verification status
- Not verified – check required
GREEN – VERIFIED DQ-001 MFN rate present in the source
- Description
- The MFN rate 10% for 7306.90.91 was checked against BT2026 (cell BT2026!N11676), basis 26/2023/NĐ-CP.
- Legal reference
- 26/2023/NĐ-CP
- Recommended action
- Verification scope: matched against source file version 2026.04.05; not a substitute for the legal text.
- Verification status
- Checked against the source tariff file
Chapter notes
Notes
1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
(1): Tham khảo TCVN 197-1:2014, TCVN 8855-1:2011 và TCVN 5905:1995
(SEN): Tham khảo Chú giải bổ sung (SEN) của Danh mục Thuế quan hài hòa ASEAN (AHTN) 2022