SECTION XV · Chapitre 73

Articles of iron or steel

Nomenclature et taux 2026 du tarif consolidé BT2026. SOURCE

Notes de chapitre (5)

Notes

1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.

2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

(1): Tham khảo TCVN 197-1:2014, TCVN 8855-1:2011 và TCVN 5905:1995

(SEN): Tham khảo Chú giải bổ sung (SEN) của Danh mục Thuế quan hài hòa ASEAN (AHTN) 2022

Code SHDescriptionUnitéDroit d'importation ordinaireMFNVAT
7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
7301.10.00 - Sheet piling kg 4,5% 3% 10 / 8 (plusieurs taux)
7301.20.00 - Angles, shapes and sections kg 7,5% 5% 10 / 8 (plusieurs taux)
7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails
7302.10.00 - Rails kg 4,5% 3% 10 / 8 (plusieurs taux)
7302.30.00 - Switch blades, crossing frogs, point rods and other crossing pieces kg 4,5% 3% 10 / 8 (plusieurs taux)
7302.40.00 - Fish-plates and sole plates kg 4,5% 3% 10 / 8 (plusieurs taux)
7302.90 - Other:
7302.90.10 - - Sleepers (cross-ties) kg 4,5% 3% 10 / 8 (plusieurs taux)
7302.90.90 - - Other kg 4,5% 3% 10 / 8 (plusieurs taux)
7303 Tubes, pipes and hollow profiles, of cast iron
- Tubes and pipes:
7303.00.11 - - Hubless tubes and pipes kg 15% 10% 10 / 8 (plusieurs taux)
7303.00.19 - - Other kg 15% 10% 10 / 8 (plusieurs taux)
- Other:
7303.00.91 - - With an external diameter not exceeding 100 mm kg 4,5% 3% 10 / 8 (plusieurs taux)
7303.00.99 - - Other kg 4,5% 3% 10 / 8 (plusieurs taux)
7304 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
- Line pipe of a kind used for oil or gas pipelines:
7304.11.00 - - Of stainless steel kg 5% 0% 10 / 8 (plusieurs taux)
7304.19.00 - - Other kg 5% 0% 10 / 8 (plusieurs taux)
- Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22 - - Drill pipe of stainless steel:
7304.22.10 - - - With a yield strength less than 80,000 psi, without threaded end kg 5% 0% 10 / 8 (plusieurs taux)
7304.22.90 - - - Other kg 5% 0% 10 / 8 (plusieurs taux)
7304.23 - - Other drill pipe:
7304.23.10 - - - With a yield strength less than 80,000 psi, without threaded end kg 5% 0% 10 / 8 (plusieurs taux)
7304.23.90 - - - Other kg 5% 0% 10 / 8 (plusieurs taux)
7304.24 - - Other, of stainless steel:
7304.24.10 - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end kg 7,5% 5% 10 / 8 (plusieurs taux)
7304.24.20 - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end kg 5% 0% 10 / 8 (plusieurs taux)
7304.24.30 - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end kg 5% 0% 10 / 8 (plusieurs taux)
7304.29 - - Other:
7304.29.10 - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end kg 7,5% 5% 10 / 8 (plusieurs taux)
7304.29.20 - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end kg 5% 0% 10 / 8 (plusieurs taux)
7304.29.30 - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end kg 5% 0% 10 / 8 (plusieurs taux)
- Other, of circular cross-section, of iron or non-alloy steel:
7304.31 - - Cold-drawn or cold-rolled (cold - reduced):
7304.31.10 - - - Drillrod casing and tubing with pin and box threads kg 7,5% 5% 10 / 8 (plusieurs taux)
7304.31.20 - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi kg 5% 0% 10 / 8 (plusieurs taux)
7304.31.40 - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon kg 15% 10% 10 / 8 (plusieurs taux)
7304.31.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7304.39 - - Other:
7304.39.20 - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi kg 5% 0% 10 / 8 (plusieurs taux)
7304.39.40 - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon kg 15% 10% 10 / 8 (plusieurs taux)
7304.39.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- Other, of circular cross-section, of stainless steel:
7304.41.00 - - Cold-drawn or cold-rolled (cold-reduced) kg 5% 0% 10 / 8 (plusieurs taux)
7304.49.00 - - Other kg 5% 0% 10 / 8 (plusieurs taux)
- Other, of circular cross-section, of other alloy steel:
7304.51 - - Cold-drawn or cold-rolled (cold-reduced):
7304.51.10 - - - Drillrod casing and tubing with pin and box threads kg 5% 0% 10 / 8 (plusieurs taux)
7304.51.20 - - - High-pressure pipe with a yield strength not less than 42,000 psi kg 5% 0% 10 / 8 (plusieurs taux)
7304.51.90 - - - Other kg 5% 0% 10 / 8 (plusieurs taux)
7304.59 - - Other:
7304.59.10 - - - High-pressure pipe with a yield strength not less than 42,000 psi kg 5% 0% 10 / 8 (plusieurs taux)
7304.59.90 - - - Other kg 5% 0% 10 / 8 (plusieurs taux)
7304.90 - Other:
7304.90.10 - - High-pressure pipe with a yield strength not less than 42,000 psi kg 5% 0% 10 / 8 (plusieurs taux)
7304.90.30 - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon kg 15% 10% 10 / 8 (plusieurs taux)
7304.90.90 - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7305 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel
- Line pipe of a kind used for oil or gas pipelines:
7305.11.00 - - Longitudinally submerged arc welded kg 7,5% 5% 10 / 8 (plusieurs taux)
7305.12 - - Other, longitudinally welded:
7305.12.10 - - - Electric resistance welded (ERW) kg 7,5% 5% 10 / 8 (plusieurs taux)
7305.12.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7305.19 - - Other:
7305.19.10 - - - Spiral or helical submerged arc welded kg 15% 10% 10 / 8 (plusieurs taux)
7305.19.90 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7305.20.00 - Casing of a kind used in drilling for oil or gas kg 7,5% 5% 10 / 8 (plusieurs taux)
- Other, welded:
7305.31 - - Longitudinally welded:
7305.31.10 - - - Stainless steel pipes and tubes kg 7,5% 5% 10 / 8 (plusieurs taux)
7305.31.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7305.39 - - Other:
7305.39.10 - - - High-pressure pipe with a yield strength not less than 42,000 psi kg 15% 10% 10 / 8 (plusieurs taux)
7305.39.90 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7305.90.00 - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- Line pipe of a kind used for oil or gas pipelines:
7306.11 - - Welded, of stainless steel:
7306.11.10 - - - Longitudinally electric resistance welded (ERW) kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.11.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.19 - - Other:
7306.19.10 - - - Longitudinally electric resistance welded (ERW) kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.19.20 - - - Spiral or helical submerged arc welded kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.19.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- Casing and tubing of a kind used in drilling for oil or gas:
7306.21.00 - - Welded, of stainless steel kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.29.00 - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.30 - Other, welded, of circular cross-section, of iron or non-alloy steel:
- - Boiler tubes:
7306.30.11 - - - With an external diameter less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.30.19 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
- - Copper-plated, fluororesin-coated or zinc-chromated steel tubes with an external diameter not exceeding 15 mm:
7306.30.21 - - - With an external diameter less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.30.29 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7306.30.30 - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm kg 15% 10% 10 / 8 (plusieurs taux)
- - High-pressure pipe with a yield strength not less than 42,000 psi:
7306.30.41 - - - With an external diameter less than 12.5 mm kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.30.49 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- - Other:
7306.30.91 - - - With an internal diameter of 12.5 mm or more, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon kg 15% 10% 10 / 8 (plusieurs taux)
7306.30.92 - - - With an internal diameter less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.30.99 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7306.40 - Other, welded, of circular cross-section, of stainless steel:
- - Boiler tubes:
7306.40.11 - - - With an external diameter not exceeding 12.5 mm kg 10,5% 7% 10 / 8 (plusieurs taux)
7306.40.19 - - - Other kg 10,5% 7% 10 / 8 (plusieurs taux)
7306.40.20 - - Stainless steel pipes and tubes, with an external diameter exceeding 105 mm kg 10,5% 7% 10 / 8 (plusieurs taux)
7306.40.30 - - Pipes and tubes containing by weight at least 30% of nickel, with an external diameter not exceeding 10 mm kg 10,5% 7% 10 / 8 (plusieurs taux)
7306.40.90 - - Other kg 5% 0% 10 / 8 (plusieurs taux)
7306.50 - Other, welded, of circular cross-section, of other alloy steel:
- - Boiler tubes:
7306.50.11 - - - With an external diameter less than 12.5 mm kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.50.19 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- - Other:
7306.50.91 - - - With an external diameter less than 12.5 mm kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.50.99 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- Other, welded, of non-circular cross-section:
7306.61 - - Of square or rectangular cross-section:
7306.61.10 - - - With an external diagonal cross-section less than 12.5 mm kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.61.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.69 - - Of other non-circular cross-section:
7306.69.10 - - - With an external diagonal cross-section less than 12.5 mm kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.69.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7306.90 - Other:
- - Copper brazed pipes and tubes:
7306.90.11 - - - With an external diagonal cross-section less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.90.19 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
- - Other:
7306.90.91 - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.90.94 - - - Other high pressure pipes, with an external diameter of less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.90.95 - - - Other high pressure pipes, with an external diameter of 12.5 mm or more kg 15% 10% 10 / 8 (plusieurs taux)
7306.90.96 - - - Other, with an external diagonal cross-section less than 12.5 mm kg 15% 10% 10 / 8 (plusieurs taux)
7306.90.97 - - - Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon kg 15% 10% 10 / 8 (plusieurs taux)
7306.90.99 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
- Cast fittings:
7307.11 - - Of non-malleable cast iron:
7307.11.10 - - - Hubless tube or pipe fittings kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.11.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.19.00 - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- Other, of stainless steel:
7307.21 - - Flanges:
7307.21.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.21.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.22 - - Threaded elbows, bends and sleeves:
7307.22.10 - - - Having an internal diameter of less than 15 cm kg 15% 10% 10 / 8 (plusieurs taux)
7307.22.90 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7307.23 - - Butt welding fittings:
7307.23.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.23.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.29 - - Other:
7307.29.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.29.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
- Other:
7307.91 - - Flanges:
7307.91.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.91.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.92 - - Threaded elbows, bends and sleeves:
7307.92.10 - - - Having an internal diameter of less than 15 cm kg 15% 10% 10 / 8 (plusieurs taux)
7307.92.90 - - - Other kg 15% 10% 10 / 8 (plusieurs taux)
7307.93 - - Butt welding fittings:
7307.93.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.93.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.99 - - Other:
7307.99.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (plusieurs taux)
7307.99.90 - - - Other kg 7,5% 5% 10 / 8 (plusieurs taux)
7308 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
7308.10 - Bridges and bridge-sections:
7308.10.10 - - Prefabricated modular type joined by shear connectors kg 5% 0% 8 / 10 (plusieurs taux)
7308.10.90 - - Other kg 4,5% 3% 8 / 10 (plusieurs taux)
7308.20 - Towers and lattice masts:
- - Towers:
7308.20.11 - - - Prefabricated modular type joined by shear connectors kg 4,5% 3% 8 / 10 (plusieurs taux)
7308.20.19 - - - Other kg 4,5% 3% 8 / 10 (plusieurs taux)
- - Lattice masts:
7308.20.21 - - - Prefabricated modular type joined by shear connectors kg 7,5% 5% 8 / 10 (plusieurs taux)
7308.20.29 - - - Other kg 7,5% 5% 8 / 10 (plusieurs taux)
7308.30 - Doors, windows and their frames and thresholds for doors:
7308.30.10 - - Doors, of a thickness of 6 mm or more but not exceeding 8 mm kg 18% 12% 8 / 10 (plusieurs taux)
7308.30.90 - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7308.40 - Equipment for scaffolding, shuttering, propping or pit-propping:
7308.40.10 - - Prefabricated modular type joined by shear connectors kg 4,5% 3% 8 / 10 (plusieurs taux)
7308.40.90 - - Other kg 4,5% 3% 8 / 10 (plusieurs taux)
7308.90 - Other:
7308.90.20 - - Prefabricated modular type joined by shear connectors kg 15% 10% 8 / 10 (plusieurs taux)
7308.90.40 - - Corrugated and curved galvanised plates or sheets prepared for use in conduits, culverts or tunnels kg 15% 10% 8 / 10 (plusieurs taux)
7308.90.50 - - Rails for ships kg 15% 10% 8 / 10 (plusieurs taux)
7308.90.60 - - Perforated cable trays kg 15% 10% 8 / 10 (plusieurs taux)
- - Other:
7308.90.92 - - - Guardrails kg 15% 10% 8 / 10 (plusieurs taux)
7308.90.99 - - - Other kg 15% 10% 8 / 10 (plusieurs taux)
7309 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
- Of a kind used for the conveyance or packing of goods:
7309.00.11 - - Lined or heat-insulated kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7309.00.19 - - Other kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
- Other:
7309.00.91 - - Lined or heat-insulated kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7309.00.99 - - Other kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7310 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
7310.10 - Of a capacity of 50 l or more:
7310.10.10 - - Of tinplate kg/unit 18% 12% 8 / 10 (plusieurs taux)
- - Other:
7310.10.91 - - - Casting, forging or stamping, in the rough state kg/unit 18% 12% 8 / 10 (plusieurs taux)
7310.10.99 - - - Other kg/unit 18% 12% 8 / 10 (plusieurs taux)
- Of a capacity of less than 50 l:
7310.21 - - Cans which are to be closed by soldering or crimping:
- - - Of a capacity of less than 1 l:
7310.21.11 - - - - Of tinplate kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7310.21.19 - - - - Other kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
- - - Other:
7310.21.91 - - - - Of tinplate kg/unit 15% 10% 8 / 10 (plusieurs taux)
7310.21.99 - - - - Other kg/unit 18% 12% 8 / 10 (plusieurs taux)
7310.29 - - Other:
- - - Of a capacity of less than 1 l:
7310.29.11 - - - - Of tinplate kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7310.29.19 - - - - Other kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
- - - Other:
7310.29.91 - - - - Of tinplate kg/unit 15% 10% 8 / 10 (plusieurs taux)
7310.29.92 - - - - Other casting, forging or stamping, in the rough state kg/unit 15% 10% 8 / 10 (plusieurs taux)
7310.29.99 - - - - Other kg/unit 15% 10% 8 / 10 (plusieurs taux)
7311 Containers for compressed or liquefied gas, of iron or steel
- Seamless steel cylinders:
7311.00.21 - - Of a capacity of 30 l or more, but less than 110 l, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7311.00.22 - - Of a capacity of 110 l or more, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) kg/unit 5% 0% 8 / 10 (plusieurs taux)
7311.00.23 - - Of a capacity of less than 30 l, for Liquefied Petroleum Gas (LPG) kg/unit 30% 20% 8 / 10 (plusieurs taux)
7311.00.24 - - Of a capacity of 30 l or more, but less than 110 l, for Liquefied Petroleum Gas (LPG) kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7311.00.25 - - Other, for Liquefied Petroleum Gas (LPG) kg/unit 5% 0% 8 / 10 (plusieurs taux)
7311.00.26 - - Other, of a capacity of less than 30 l kg/unit 30% 20% 8 / 10 (plusieurs taux)
7311.00.27 - - Other, of a capacity of 30 l or more, but less than 110 l kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7311.00.29 - - Other kg/unit 5% 0% 8 / 10 (plusieurs taux)
- Other:
7311.00.91 - - Of a capacity not exceeding 7.3 l kg/unit 25,5% 17% 8 / 10 (plusieurs taux)
7311.00.92 - - Of a capacity more than 7.3 l but less than 30 l kg/unit 25,5% 17% 8 / 10 (plusieurs taux)
7311.00.94 - - Of a capacity of 30 l or more, but less than 110 l kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7311.00.99 - - Other kg/unit 5% 0% 8 / 10 (plusieurs taux)
7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
7312.10 - Stranded wire, ropes and cables:
7312.10.10 - - Locked coils, flattened strands and non-rotating wire ropes kg 7,5% 5% 8 / 10 (plusieurs taux)
7312.10.20 - - Plated or coated with brass and of a diameter not exceeding 3 mm kg 7,5% 5% 8 / 10 (plusieurs taux)
7312.10.30 - - Plated or coated with aluminium kg 7,5% 5% 8 / 10 (plusieurs taux)
- - Other:
7312.10.91 - - - Stranded steel wire for prestressing concrete kg 4,5% 3% 8 / 10 (plusieurs taux)
7312.10.99 - - - Other kg 7,5% 5% 8 / 10 (plusieurs taux)
7312.90.00 - Other kg 7,5% 5% 8 / 10 (plusieurs taux)
7313.00.00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel kg 45% 30% 8 / 10 (plusieurs taux)
7314 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel
- Woven cloth:
7314.12.00 - - Endless bands for machinery, of stainless steel kg 22,5% 15% 8 / 10 (plusieurs taux)
7314.14.00 - - Other woven cloth, of stainless steel kg 22,5% 15% 8 / 10 (plusieurs taux)
7314.19 - - Other:
7314.19.10 - - - Endless bands for machinery other than of stainless steel kg 22,5% 15% 8 / 10 (plusieurs taux)
7314.19.90 - - - Other kg 22,5% 15% 8 / 10 (plusieurs taux)
7314.20.00 - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more kg 22,5% 15% 8 / 10 (plusieurs taux)
- Other grill, netting and fencing, welded at the intersection:
7314.31.00 - - Plated or coated with zinc kg 30% 20% 8 / 10 (plusieurs taux)
7314.39.00 - - Other kg 30% 20% 8 / 10 (plusieurs taux)
- Other cloth, grill, netting and fencing:
7314.41.00 - - Plated or coated with zinc kg 45% 30% 8 / 10 (plusieurs taux)
7314.42.00 - - Coated with plastics kg 45% 30% 8 / 10 (plusieurs taux)
7314.49.00 - - Other kg 45% 30% 8 / 10 (plusieurs taux)
7314.50.00 - Expanded metal kg 30% 20% 8 / 10 (plusieurs taux)
7315 Chain and parts thereof, of iron or steel
- Articulated link chain and parts thereof:
7315.11 - - Roller chain:
7315.11.10 - - - Bicycle or motorcycle chain kg/unit 52,5% 35% 8 / 10 (plusieurs taux)
- - - Other:
7315.11.91 - - - - Transmission type, of a pitch length of not less than 6 mm and not more than 32 mm kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.11.99 - - - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.12 - - Other chain:
7315.12.10 - - - Bicycle or motorcycle chain kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.12.90 - - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.19 - - Parts:
7315.19.10 - - - Of bicycle or motorcycle chain kg/unit 52,5% 35% 8 / 10 (plusieurs taux)
7315.19.90 - - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.20.00 - Skid chain kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
- Other chain:
7315.81.00 - - Stud-link kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.82.00 - - Other, welded link kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.89 - - Other:
7315.89.10 - - - Bicycle or motorcycle chain kg/unit 45% 30% 8 / 10 (plusieurs taux)
7315.89.90 - - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7315.90 - Other parts:
7315.90.20 - - Of bicycle or motorcycle chain kg/unit 45% 30% 8 / 10 (plusieurs taux)
7315.90.90 - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7316.00.00 Anchors, grapnels and parts thereof, of iron or steel kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7317 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
7317.00.10 - Wire nails kg 30% 20% 8 / 10 (plusieurs taux)
7317.00.20 - Staples kg 30% 20% 8 / 10 (plusieurs taux)
7317.00.30 - Dog spikes for rail sleepers; gang nails kg 30% 20% 8 / 10 (plusieurs taux)
7317.00.90 - Other kg 30% 20% 8 / 10 (plusieurs taux)
7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel
- Threaded articles:
7318.11.00 - - Coach screws kg 7,5% 5% 8 / 10 (plusieurs taux)
7318.12 - - Other wood screws:
7318.12.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.12.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7318.13.00 - - Screw hooks and screw rings kg 15% 10% 8 / 10 (plusieurs taux)
7318.14 - - Self-tapping screws:
7318.14.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.14.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7318.15 - - Other screws and bolts, whether or not with their nuts or washers:
7318.15.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.15.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7318.16 - - Nuts:
7318.16.10 - - - For bolts having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.16.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7318.19 - - Other:
7318.19.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.19.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
- Non-threaded articles:
7318.21.00 - - Spring washers and other lock washers kg 18% 12% 8 / 10 (plusieurs taux)
7318.22.00 - - Other washers kg 18% 12% 8 / 10 (plusieurs taux)
7318.23 - - Rivets:
7318.23.10 - - - Having an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.23.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7318.24.00 - - Cotters and cotter-pins kg 18% 12% 8 / 10 (plusieurs taux)
7318.29 - - Other:
7318.29.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (plusieurs taux)
7318.29.90 - - - Other kg 18% 12% 8 / 10 (plusieurs taux)
7319 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
7319.40 - Safety pins and other pins:
7319.40.10 - - Safety pins kg 45% 30% 8 / 10 (plusieurs taux)
7319.40.20 - - Other pins kg 45% 30% 8 / 10 (plusieurs taux)
7319.90 - Other:
7319.90.10 - - Sewing, darning or embroidery needles kg 45% 30% 8 / 10 (plusieurs taux)
7319.90.90 - - Other kg 45% 30% 8 / 10 (plusieurs taux)
7320 Springs and leaves for springs, of iron or steel
7320.10 - Leaf-springs and leaves therefor:
- - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30:
7320.10.11 - - - Suitable for use on motor vehicles of heading 87.02, 87.03 or 87.04 kg/unit 15% 10% 8 / 10 (plusieurs taux)
7320.10.12 - - - Suitable for use on other motor vehicles kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.10.19 - - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.10.90 - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.20 - Helical springs:
- - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30:
7320.20.11 - - - For motor vehicles kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.20.12 - - - For earth-moving machinery kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.20.19 - - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.20.90 - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.90 - Other:
7320.90.10 - - Suitable for use on motor vehicles kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7320.90.90 - - Other kg/unit 4,5% 3% 8 / 10 (plusieurs taux)
7321 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel
- Cooking appliances and plate warmers:
7321.11.00 - - For gas fuel or for both gas and other fuels unit 22,5% 15% 8 / 10 (plusieurs taux)
7321.12.00 - - For liquid fuel unit 30% 20% 8 / 10 (plusieurs taux)
7321.19 - - Other, including appliances for solid fuel:
7321.19.10 - - - For solid fuel unit 30% 20% 8 / 10 (plusieurs taux)
7321.19.90 - - - Other unit 30% 20% 8 / 10 (plusieurs taux)
- Other appliances:
7321.81.00 - - For gas fuel or for both gas and other fuels unit 22,5% 15% 8 / 10 (plusieurs taux)
7321.82.00 - - For liquid fuel unit 37,5% 25% 8 / 10 (plusieurs taux)
7321.89.00 - - Other, including appliances for solid fuel unit 37,5% 25% 8 / 10 (plusieurs taux)
7321.90 - Parts:
7321.90.10 - - Of kerosene stoves kg/unit 15% 10% 8 / 10 (plusieurs taux)
- - Of cooking appliances and plate warmers using gas fuel:
7321.90.21 - - - Burner; components made by stamping or pressing processes kg/unit 15% 10% 8 / 10 (plusieurs taux)
7321.90.29 - - - Other kg/unit 15% 10% 8 / 10 (plusieurs taux)
7321.90.90 - - Other kg/unit 15% 10% 8 / 10 (plusieurs taux)
7322 Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor- driven fan or blower, and parts thereof, of iron or steel
- Radiators and parts thereof:
7322.11.00 - - Of cast iron kg/unit 40,5% 27% 8 / 10 (plusieurs taux)
7322.19.00 - - Other kg/unit 45% 30% 8 / 10 (plusieurs taux)
7322.90.00 - Other kg/unit 30% 20% 8 / 10 (plusieurs taux)
7323 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel
7323.10.00 - Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like kg/unit 37,5% 25% 8 / 10 (plusieurs taux)
- Other:
7323.91 - - Of cast iron, not enamelled:
7323.91.10 - - - Kitchenware kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.91.20 - - - Ashtrays kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.91.90 - - - Other kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.92.00 - - Of cast iron, enamelled kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.93 - - Of stainless steel:
7323.93.10 - - - Kitchenware kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.93.20 - - - Ashtrays kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.93.90 - - - Other kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.94.00 - - Of iron (other than cast iron) or steel, enamelled kg/unit 45% 30% 8 / 10 (plusieurs taux)
7323.99 - - Other:
7323.99.10 - - - Kitchenware kg/unit 30% 20% 8 / 10 (plusieurs taux)
7323.99.20 - - - Ashtrays kg/unit 30% 20% 8 / 10 (plusieurs taux)
7323.99.90 - - - Other kg/unit 30% 20% 8 / 10 (plusieurs taux)
7324 Sanitary ware and parts thereof, of iron or steel
7324.10 - Sinks and wash basins, of stainless steel:
7324.10.10 - - Kitchen sinks kg/unit 30% 20% 8 / 10 (plusieurs taux)
7324.10.90 - - Other kg/unit 30% 20% 8 / 10 (plusieurs taux)
- Baths:
7324.21 - - Of cast iron, whether or not enamelled:
7324.21.10 - - - Bathtubs having rectangular or oblong interior shape kg/unit 52,5% 35% 8 / 10 (plusieurs taux)
7324.21.90 - - - Other kg/unit 52,5% 35% 8 / 10 (plusieurs taux)
7324.29 - - Other:
7324.29.10 - - - Bathtubs having rectangular or oblong interior shape kg/unit 52,5% 35% 8 / 10 (plusieurs taux)
7324.29.90 - - - Other kg/unit 52,5% 35% 8 / 10 (plusieurs taux)
7324.90 - Other, including parts:
7324.90.10 - - Flushing water closets or urinals (fixed type) kg/unit 30% 20% 8 / 10 (plusieurs taux)
- - Other:
7324.90.91 - - - Parts of kitchen sinks or bathtubs kg/unit 30% 20% 8 / 10 (plusieurs taux)
7324.90.93 - - - Parts of flushing water closets or urinals (fixed type) kg/unit 30% 20% 8 / 10 (plusieurs taux)
7324.90.99 - - - Other kg/unit 30% 20% 8 / 10 (plusieurs taux)
7325 Other cast articles of iron or steel
7325.10 - Of non-malleable cast iron:
7325.10.20 - - Manhole covers, gratings and frames therefor kg/unit 30% 20% 8 / 10 (plusieurs taux)
7325.10.30 - - Spouts and cups for latex collection kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7325.10.90 - - Other kg/unit 22,5% 15% 10 / 8 (plusieurs taux)
- Other:
7325.91.00 - - Grinding balls and similar articles for mills kg/unit 30% 20% 8 / 10 (plusieurs taux)
7325.99 - - Other:
7325.99.20 - - - Manhole covers, gratings and frames therefor kg/unit 30% 20% 8 / 10 (plusieurs taux)
7325.99.90 - - - Other kg/unit 30% 20% 10 / 8 (plusieurs taux)
7326 Other articles of iron or steel
- Forged or stamped, but not further worked:
7326.11.00 - - Grinding balls and similar articles for mills kg/unit 30% 20% 8 / 10 (plusieurs taux)
7326.19.00 - - Other kg/unit 15% 10% 8 / 10 (plusieurs taux)
7326.20 - Articles of iron or steel wire:
7326.20.50 - - Poultry cages and the like kg/unit 30% 20% 8 / 10 (plusieurs taux)
7326.20.60 - - Rat traps kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7326.20.70 - - Wire mesh curtain and blinds kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7326.20.90 - - Other kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7326.90 - Other:
7326.90.10 - - Ships' rudders kg/unit 7,5% 5% 8 / 10 (plusieurs taux)
7326.90.20 - - Spouts and cups for latex collection kg/unit 15% 10% 8 / 10 (plusieurs taux)
7326.90.30 - - Stainless steel clamp assemblies with rubber sleeves of a kind used for hubless cast iron pipes and pipe fittings kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7326.90.60 - - Bunsen burners kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7326.90.70 - - Horseshoes; riding boot spurs kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
- - Other:
7326.90.91 - - - Cigarette cases and boxes kg/unit 22,5% 15% 8 / 10 (plusieurs taux)
7326.90.99 - - - Other kg/unit 15% 10% 10 / 8 (plusieurs taux)