SECTION XV · Capítulo 73
Articles of iron or steel
Nomenclatura e taxas de 2026 da pauta consolidada BT2026. FONTE
Notas de capítulo (5)
Notes
1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
(1): Tham khảo TCVN 197-1:2014, TCVN 8855-1:2011 và TCVN 5905:1995
(SEN): Tham khảo Chú giải bổ sung (SEN) của Danh mục Thuế quan hài hòa ASEAN (AHTN) 2022
| Código SH | Descrição | Unidade | Direito de importação ordinário | MFN | VAT |
|---|---|---|---|---|---|
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel | ||||
| 7301.10.00 | - Sheet piling | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7301.20.00 | - Angles, shapes and sections | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7302 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails | ||||
| 7302.10.00 | - Rails | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7302.30.00 | - Switch blades, crossing frogs, point rods and other crossing pieces | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7302.40.00 | - Fish-plates and sole plates | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7302.90 | - Other: | ||||
| 7302.90.10 | - - Sleepers (cross-ties) | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7302.90.90 | - - Other | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7303 | Tubes, pipes and hollow profiles, of cast iron | ||||
| - Tubes and pipes: | |||||
| 7303.00.11 | - - Hubless tubes and pipes | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7303.00.19 | - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| - Other: | |||||
| 7303.00.91 | - - With an external diameter not exceeding 100 mm | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7303.00.99 | - - Other | kg | 4,5% | 3% | 10 / 8 (várias taxas) |
| 7304 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel | ||||
| - Line pipe of a kind used for oil or gas pipelines: | |||||
| 7304.11.00 | - - Of stainless steel | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.19.00 | - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: | |||||
| 7304.22 | - - Drill pipe of stainless steel: | ||||
| 7304.22.10 | - - - With a yield strength less than 80,000 psi, without threaded end | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.22.90 | - - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.23 | - - Other drill pipe: | ||||
| 7304.23.10 | - - - With a yield strength less than 80,000 psi, without threaded end | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.23.90 | - - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.24 | - - Other, of stainless steel: | ||||
| 7304.24.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7304.24.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.24.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.29 | - - Other: | ||||
| 7304.29.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7304.29.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.29.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | kg | 5% | 0% | 10 / 8 (várias taxas) |
| - Other, of circular cross-section, of iron or non-alloy steel: | |||||
| 7304.31 | - - Cold-drawn or cold-rolled (cold - reduced): | ||||
| 7304.31.10 | - - - Drillrod casing and tubing with pin and box threads | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7304.31.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.31.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7304.31.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7304.39 | - - Other: | ||||
| 7304.39.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.39.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7304.39.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - Other, of circular cross-section, of stainless steel: | |||||
| 7304.41.00 | - - Cold-drawn or cold-rolled (cold-reduced) | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.49.00 | - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| - Other, of circular cross-section, of other alloy steel: | |||||
| 7304.51 | - - Cold-drawn or cold-rolled (cold-reduced): | ||||
| 7304.51.10 | - - - Drillrod casing and tubing with pin and box threads | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.51.20 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.51.90 | - - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.59 | - - Other: | ||||
| 7304.59.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.59.90 | - - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.90 | - Other: | ||||
| 7304.90.10 | - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7304.90.30 | - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7304.90.90 | - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7305 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel | ||||
| - Line pipe of a kind used for oil or gas pipelines: | |||||
| 7305.11.00 | - - Longitudinally submerged arc welded | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7305.12 | - - Other, longitudinally welded: | ||||
| 7305.12.10 | - - - Electric resistance welded (ERW) | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7305.12.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7305.19 | - - Other: | ||||
| 7305.19.10 | - - - Spiral or helical submerged arc welded | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7305.19.90 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7305.20.00 | - Casing of a kind used in drilling for oil or gas | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - Other, welded: | |||||
| 7305.31 | - - Longitudinally welded: | ||||
| 7305.31.10 | - - - Stainless steel pipes and tubes | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7305.31.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7305.39 | - - Other: | ||||
| 7305.39.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7305.39.90 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7305.90.00 | - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel | ||||
| - Line pipe of a kind used for oil or gas pipelines: | |||||
| 7306.11 | - - Welded, of stainless steel: | ||||
| 7306.11.10 | - - - Longitudinally electric resistance welded (ERW) | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.11.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.19 | - - Other: | ||||
| 7306.19.10 | - - - Longitudinally electric resistance welded (ERW) | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.19.20 | - - - Spiral or helical submerged arc welded | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.19.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - Casing and tubing of a kind used in drilling for oil or gas: | |||||
| 7306.21.00 | - - Welded, of stainless steel | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.29.00 | - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.30 | - Other, welded, of circular cross-section, of iron or non-alloy steel: | ||||
| - - Boiler tubes: | |||||
| 7306.30.11 | - - - With an external diameter less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.30.19 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| - - Copper-plated, fluororesin-coated or zinc-chromated steel tubes with an external diameter not exceeding 15 mm: | |||||
| 7306.30.21 | - - - With an external diameter less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.30.29 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.30.30 | - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| - - High-pressure pipe with a yield strength not less than 42,000 psi: | |||||
| 7306.30.41 | - - - With an external diameter less than 12.5 mm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.30.49 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - - Other: | |||||
| 7306.30.91 | - - - With an internal diameter of 12.5 mm or more, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.30.92 | - - - With an internal diameter less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.30.99 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.40 | - Other, welded, of circular cross-section, of stainless steel: | ||||
| - - Boiler tubes: | |||||
| 7306.40.11 | - - - With an external diameter not exceeding 12.5 mm | kg | 10,5% | 7% | 10 / 8 (várias taxas) |
| 7306.40.19 | - - - Other | kg | 10,5% | 7% | 10 / 8 (várias taxas) |
| 7306.40.20 | - - Stainless steel pipes and tubes, with an external diameter exceeding 105 mm | kg | 10,5% | 7% | 10 / 8 (várias taxas) |
| 7306.40.30 | - - Pipes and tubes containing by weight at least 30% of nickel, with an external diameter not exceeding 10 mm | kg | 10,5% | 7% | 10 / 8 (várias taxas) |
| 7306.40.90 | - - Other | kg | 5% | 0% | 10 / 8 (várias taxas) |
| 7306.50 | - Other, welded, of circular cross-section, of other alloy steel: | ||||
| - - Boiler tubes: | |||||
| 7306.50.11 | - - - With an external diameter less than 12.5 mm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.50.19 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - - Other: | |||||
| 7306.50.91 | - - - With an external diameter less than 12.5 mm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.50.99 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - Other, welded, of non-circular cross-section: | |||||
| 7306.61 | - - Of square or rectangular cross-section: | ||||
| 7306.61.10 | - - - With an external diagonal cross-section less than 12.5 mm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.61.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.69 | - - Of other non-circular cross-section: | ||||
| 7306.69.10 | - - - With an external diagonal cross-section less than 12.5 mm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.69.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7306.90 | - Other: | ||||
| - - Copper brazed pipes and tubes: | |||||
| 7306.90.11 | - - - With an external diagonal cross-section less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.90.19 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| - - Other: | |||||
| 7306.90.91 | - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.90.94 | - - - Other high pressure pipes, with an external diameter of less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.90.95 | - - - Other high pressure pipes, with an external diameter of 12.5 mm or more | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.90.96 | - - - Other, with an external diagonal cross-section less than 12.5 mm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.90.97 | - - - Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7306.90.99 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7307 | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel | ||||
| - Cast fittings: | |||||
| 7307.11 | - - Of non-malleable cast iron: | ||||
| 7307.11.10 | - - - Hubless tube or pipe fittings | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.11.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.19.00 | - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - Other, of stainless steel: | |||||
| 7307.21 | - - Flanges: | ||||
| 7307.21.10 | - - - Having an internal diameter of less than 15 cm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.21.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.22 | - - Threaded elbows, bends and sleeves: | ||||
| 7307.22.10 | - - - Having an internal diameter of less than 15 cm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7307.22.90 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7307.23 | - - Butt welding fittings: | ||||
| 7307.23.10 | - - - Having an internal diameter of less than 15 cm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.23.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.29 | - - Other: | ||||
| 7307.29.10 | - - - Having an internal diameter of less than 15 cm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.29.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| - Other: | |||||
| 7307.91 | - - Flanges: | ||||
| 7307.91.10 | - - - Having an internal diameter of less than 15 cm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.91.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.92 | - - Threaded elbows, bends and sleeves: | ||||
| 7307.92.10 | - - - Having an internal diameter of less than 15 cm | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7307.92.90 | - - - Other | kg | 15% | 10% | 10 / 8 (várias taxas) |
| 7307.93 | - - Butt welding fittings: | ||||
| 7307.93.10 | - - - Having an internal diameter of less than 15 cm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.93.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.99 | - - Other: | ||||
| 7307.99.10 | - - - Having an internal diameter of less than 15 cm | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7307.99.90 | - - - Other | kg | 7,5% | 5% | 10 / 8 (várias taxas) |
| 7308 | Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel | ||||
| 7308.10 | - Bridges and bridge-sections: | ||||
| 7308.10.10 | - - Prefabricated modular type joined by shear connectors | kg | 5% | 0% | 8 / 10 (várias taxas) |
| 7308.10.90 | - - Other | kg | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7308.20 | - Towers and lattice masts: | ||||
| - - Towers: | |||||
| 7308.20.11 | - - - Prefabricated modular type joined by shear connectors | kg | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7308.20.19 | - - - Other | kg | 4,5% | 3% | 8 / 10 (várias taxas) |
| - - Lattice masts: | |||||
| 7308.20.21 | - - - Prefabricated modular type joined by shear connectors | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7308.20.29 | - - - Other | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7308.30 | - Doors, windows and their frames and thresholds for doors: | ||||
| 7308.30.10 | - - Doors, of a thickness of 6 mm or more but not exceeding 8 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7308.30.90 | - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7308.40 | - Equipment for scaffolding, shuttering, propping or pit-propping: | ||||
| 7308.40.10 | - - Prefabricated modular type joined by shear connectors | kg | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7308.40.90 | - - Other | kg | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7308.90 | - Other: | ||||
| 7308.90.20 | - - Prefabricated modular type joined by shear connectors | kg | 15% | 10% | 8 / 10 (várias taxas) |
| 7308.90.40 | - - Corrugated and curved galvanised plates or sheets prepared for use in conduits, culverts or tunnels | kg | 15% | 10% | 8 / 10 (várias taxas) |
| 7308.90.50 | - - Rails for ships | kg | 15% | 10% | 8 / 10 (várias taxas) |
| 7308.90.60 | - - Perforated cable trays | kg | 15% | 10% | 8 / 10 (várias taxas) |
| - - Other: | |||||
| 7308.90.92 | - - - Guardrails | kg | 15% | 10% | 8 / 10 (várias taxas) |
| 7308.90.99 | - - - Other | kg | 15% | 10% | 8 / 10 (várias taxas) |
| 7309 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | ||||
| - Of a kind used for the conveyance or packing of goods: | |||||
| 7309.00.11 | - - Lined or heat-insulated | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7309.00.19 | - - Other | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| - Other: | |||||
| 7309.00.91 | - - Lined or heat-insulated | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7309.00.99 | - - Other | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | ||||
| 7310.10 | - Of a capacity of 50 l or more: | ||||
| 7310.10.10 | - - Of tinplate | kg/unit | 18% | 12% | 8 / 10 (várias taxas) |
| - - Other: | |||||
| 7310.10.91 | - - - Casting, forging or stamping, in the rough state | kg/unit | 18% | 12% | 8 / 10 (várias taxas) |
| 7310.10.99 | - - - Other | kg/unit | 18% | 12% | 8 / 10 (várias taxas) |
| - Of a capacity of less than 50 l: | |||||
| 7310.21 | - - Cans which are to be closed by soldering or crimping: | ||||
| - - - Of a capacity of less than 1 l: | |||||
| 7310.21.11 | - - - - Of tinplate | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7310.21.19 | - - - - Other | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| - - - Other: | |||||
| 7310.21.91 | - - - - Of tinplate | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7310.21.99 | - - - - Other | kg/unit | 18% | 12% | 8 / 10 (várias taxas) |
| 7310.29 | - - Other: | ||||
| - - - Of a capacity of less than 1 l: | |||||
| 7310.29.11 | - - - - Of tinplate | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7310.29.19 | - - - - Other | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| - - - Other: | |||||
| 7310.29.91 | - - - - Of tinplate | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7310.29.92 | - - - - Other casting, forging or stamping, in the rough state | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7310.29.99 | - - - - Other | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7311 | Containers for compressed or liquefied gas, of iron or steel | ||||
| - Seamless steel cylinders: | |||||
| 7311.00.21 | - - Of a capacity of 30 l or more, but less than 110 l, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7311.00.22 | - - Of a capacity of 110 l or more, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | kg/unit | 5% | 0% | 8 / 10 (várias taxas) |
| 7311.00.23 | - - Of a capacity of less than 30 l, for Liquefied Petroleum Gas (LPG) | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7311.00.24 | - - Of a capacity of 30 l or more, but less than 110 l, for Liquefied Petroleum Gas (LPG) | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7311.00.25 | - - Other, for Liquefied Petroleum Gas (LPG) | kg/unit | 5% | 0% | 8 / 10 (várias taxas) |
| 7311.00.26 | - - Other, of a capacity of less than 30 l | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7311.00.27 | - - Other, of a capacity of 30 l or more, but less than 110 l | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7311.00.29 | - - Other | kg/unit | 5% | 0% | 8 / 10 (várias taxas) |
| - Other: | |||||
| 7311.00.91 | - - Of a capacity not exceeding 7.3 l | kg/unit | 25,5% | 17% | 8 / 10 (várias taxas) |
| 7311.00.92 | - - Of a capacity more than 7.3 l but less than 30 l | kg/unit | 25,5% | 17% | 8 / 10 (várias taxas) |
| 7311.00.94 | - - Of a capacity of 30 l or more, but less than 110 l | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7311.00.99 | - - Other | kg/unit | 5% | 0% | 8 / 10 (várias taxas) |
| 7312 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated | ||||
| 7312.10 | - Stranded wire, ropes and cables: | ||||
| 7312.10.10 | - - Locked coils, flattened strands and non-rotating wire ropes | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7312.10.20 | - - Plated or coated with brass and of a diameter not exceeding 3 mm | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7312.10.30 | - - Plated or coated with aluminium | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| - - Other: | |||||
| 7312.10.91 | - - - Stranded steel wire for prestressing concrete | kg | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7312.10.99 | - - - Other | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7312.90.00 | - Other | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7313.00.00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7314 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel | ||||
| - Woven cloth: | |||||
| 7314.12.00 | - - Endless bands for machinery, of stainless steel | kg | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7314.14.00 | - - Other woven cloth, of stainless steel | kg | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7314.19 | - - Other: | ||||
| 7314.19.10 | - - - Endless bands for machinery other than of stainless steel | kg | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7314.19.90 | - - - Other | kg | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7314.20.00 | - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | kg | 22,5% | 15% | 8 / 10 (várias taxas) |
| - Other grill, netting and fencing, welded at the intersection: | |||||
| 7314.31.00 | - - Plated or coated with zinc | kg | 30% | 20% | 8 / 10 (várias taxas) |
| 7314.39.00 | - - Other | kg | 30% | 20% | 8 / 10 (várias taxas) |
| - Other cloth, grill, netting and fencing: | |||||
| 7314.41.00 | - - Plated or coated with zinc | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7314.42.00 | - - Coated with plastics | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7314.49.00 | - - Other | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7314.50.00 | - Expanded metal | kg | 30% | 20% | 8 / 10 (várias taxas) |
| 7315 | Chain and parts thereof, of iron or steel | ||||
| - Articulated link chain and parts thereof: | |||||
| 7315.11 | - - Roller chain: | ||||
| 7315.11.10 | - - - Bicycle or motorcycle chain | kg/unit | 52,5% | 35% | 8 / 10 (várias taxas) |
| - - - Other: | |||||
| 7315.11.91 | - - - - Transmission type, of a pitch length of not less than 6 mm and not more than 32 mm | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.11.99 | - - - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.12 | - - Other chain: | ||||
| 7315.12.10 | - - - Bicycle or motorcycle chain | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.12.90 | - - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.19 | - - Parts: | ||||
| 7315.19.10 | - - - Of bicycle or motorcycle chain | kg/unit | 52,5% | 35% | 8 / 10 (várias taxas) |
| 7315.19.90 | - - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.20.00 | - Skid chain | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| - Other chain: | |||||
| 7315.81.00 | - - Stud-link | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.82.00 | - - Other, welded link | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.89 | - - Other: | ||||
| 7315.89.10 | - - - Bicycle or motorcycle chain | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7315.89.90 | - - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7315.90 | - Other parts: | ||||
| 7315.90.20 | - - Of bicycle or motorcycle chain | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7315.90.90 | - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7316.00.00 | Anchors, grapnels and parts thereof, of iron or steel | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7317 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper | ||||
| 7317.00.10 | - Wire nails | kg | 30% | 20% | 8 / 10 (várias taxas) |
| 7317.00.20 | - Staples | kg | 30% | 20% | 8 / 10 (várias taxas) |
| 7317.00.30 | - Dog spikes for rail sleepers; gang nails | kg | 30% | 20% | 8 / 10 (várias taxas) |
| 7317.00.90 | - Other | kg | 30% | 20% | 8 / 10 (várias taxas) |
| 7318 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel | ||||
| - Threaded articles: | |||||
| 7318.11.00 | - - Coach screws | kg | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7318.12 | - - Other wood screws: | ||||
| 7318.12.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.12.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.13.00 | - - Screw hooks and screw rings | kg | 15% | 10% | 8 / 10 (várias taxas) |
| 7318.14 | - - Self-tapping screws: | ||||
| 7318.14.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.14.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.15 | - - Other screws and bolts, whether or not with their nuts or washers: | ||||
| 7318.15.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.15.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.16 | - - Nuts: | ||||
| 7318.16.10 | - - - For bolts having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.16.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.19 | - - Other: | ||||
| 7318.19.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.19.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| - Non-threaded articles: | |||||
| 7318.21.00 | - - Spring washers and other lock washers | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.22.00 | - - Other washers | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.23 | - - Rivets: | ||||
| 7318.23.10 | - - - Having an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.23.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.24.00 | - - Cotters and cotter-pins | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.29 | - - Other: | ||||
| 7318.29.10 | - - - Having a shank of an external diameter not exceeding 16 mm | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7318.29.90 | - - - Other | kg | 18% | 12% | 8 / 10 (várias taxas) |
| 7319 | Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included | ||||
| 7319.40 | - Safety pins and other pins: | ||||
| 7319.40.10 | - - Safety pins | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7319.40.20 | - - Other pins | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7319.90 | - Other: | ||||
| 7319.90.10 | - - Sewing, darning or embroidery needles | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7319.90.90 | - - Other | kg | 45% | 30% | 8 / 10 (várias taxas) |
| 7320 | Springs and leaves for springs, of iron or steel | ||||
| 7320.10 | - Leaf-springs and leaves therefor: | ||||
| - - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30: | |||||
| 7320.10.11 | - - - Suitable for use on motor vehicles of heading 87.02, 87.03 or 87.04 | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7320.10.12 | - - - Suitable for use on other motor vehicles | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.10.19 | - - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.10.90 | - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.20 | - Helical springs: | ||||
| - - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30: | |||||
| 7320.20.11 | - - - For motor vehicles | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.20.12 | - - - For earth-moving machinery | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.20.19 | - - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.20.90 | - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.90 | - Other: | ||||
| 7320.90.10 | - - Suitable for use on motor vehicles | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7320.90.90 | - - Other | kg/unit | 4,5% | 3% | 8 / 10 (várias taxas) |
| 7321 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel | ||||
| - Cooking appliances and plate warmers: | |||||
| 7321.11.00 | - - For gas fuel or for both gas and other fuels | unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7321.12.00 | - - For liquid fuel | unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7321.19 | - - Other, including appliances for solid fuel: | ||||
| 7321.19.10 | - - - For solid fuel | unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7321.19.90 | - - - Other | unit | 30% | 20% | 8 / 10 (várias taxas) |
| - Other appliances: | |||||
| 7321.81.00 | - - For gas fuel or for both gas and other fuels | unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7321.82.00 | - - For liquid fuel | unit | 37,5% | 25% | 8 / 10 (várias taxas) |
| 7321.89.00 | - - Other, including appliances for solid fuel | unit | 37,5% | 25% | 8 / 10 (várias taxas) |
| 7321.90 | - Parts: | ||||
| 7321.90.10 | - - Of kerosene stoves | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| - - Of cooking appliances and plate warmers using gas fuel: | |||||
| 7321.90.21 | - - - Burner; components made by stamping or pressing processes | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7321.90.29 | - - - Other | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7321.90.90 | - - Other | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7322 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor- driven fan or blower, and parts thereof, of iron or steel | ||||
| - Radiators and parts thereof: | |||||
| 7322.11.00 | - - Of cast iron | kg/unit | 40,5% | 27% | 8 / 10 (várias taxas) |
| 7322.19.00 | - - Other | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7322.90.00 | - Other | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7323 | Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel | ||||
| 7323.10.00 | - Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | kg/unit | 37,5% | 25% | 8 / 10 (várias taxas) |
| - Other: | |||||
| 7323.91 | - - Of cast iron, not enamelled: | ||||
| 7323.91.10 | - - - Kitchenware | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.91.20 | - - - Ashtrays | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.91.90 | - - - Other | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.92.00 | - - Of cast iron, enamelled | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.93 | - - Of stainless steel: | ||||
| 7323.93.10 | - - - Kitchenware | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.93.20 | - - - Ashtrays | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.93.90 | - - - Other | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.94.00 | - - Of iron (other than cast iron) or steel, enamelled | kg/unit | 45% | 30% | 8 / 10 (várias taxas) |
| 7323.99 | - - Other: | ||||
| 7323.99.10 | - - - Kitchenware | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7323.99.20 | - - - Ashtrays | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7323.99.90 | - - - Other | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7324 | Sanitary ware and parts thereof, of iron or steel | ||||
| 7324.10 | - Sinks and wash basins, of stainless steel: | ||||
| 7324.10.10 | - - Kitchen sinks | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7324.10.90 | - - Other | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| - Baths: | |||||
| 7324.21 | - - Of cast iron, whether or not enamelled: | ||||
| 7324.21.10 | - - - Bathtubs having rectangular or oblong interior shape | kg/unit | 52,5% | 35% | 8 / 10 (várias taxas) |
| 7324.21.90 | - - - Other | kg/unit | 52,5% | 35% | 8 / 10 (várias taxas) |
| 7324.29 | - - Other: | ||||
| 7324.29.10 | - - - Bathtubs having rectangular or oblong interior shape | kg/unit | 52,5% | 35% | 8 / 10 (várias taxas) |
| 7324.29.90 | - - - Other | kg/unit | 52,5% | 35% | 8 / 10 (várias taxas) |
| 7324.90 | - Other, including parts: | ||||
| 7324.90.10 | - - Flushing water closets or urinals (fixed type) | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| - - Other: | |||||
| 7324.90.91 | - - - Parts of kitchen sinks or bathtubs | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7324.90.93 | - - - Parts of flushing water closets or urinals (fixed type) | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7324.90.99 | - - - Other | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7325 | Other cast articles of iron or steel | ||||
| 7325.10 | - Of non-malleable cast iron: | ||||
| 7325.10.20 | - - Manhole covers, gratings and frames therefor | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7325.10.30 | - - Spouts and cups for latex collection | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7325.10.90 | - - Other | kg/unit | 22,5% | 15% | 10 / 8 (várias taxas) |
| - Other: | |||||
| 7325.91.00 | - - Grinding balls and similar articles for mills | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7325.99 | - - Other: | ||||
| 7325.99.20 | - - - Manhole covers, gratings and frames therefor | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7325.99.90 | - - - Other | kg/unit | 30% | 20% | 10 / 8 (várias taxas) |
| 7326 | Other articles of iron or steel | ||||
| - Forged or stamped, but not further worked: | |||||
| 7326.11.00 | - - Grinding balls and similar articles for mills | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7326.19.00 | - - Other | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7326.20 | - Articles of iron or steel wire: | ||||
| 7326.20.50 | - - Poultry cages and the like | kg/unit | 30% | 20% | 8 / 10 (várias taxas) |
| 7326.20.60 | - - Rat traps | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7326.20.70 | - - Wire mesh curtain and blinds | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7326.20.90 | - - Other | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7326.90 | - Other: | ||||
| 7326.90.10 | - - Ships' rudders | kg/unit | 7,5% | 5% | 8 / 10 (várias taxas) |
| 7326.90.20 | - - Spouts and cups for latex collection | kg/unit | 15% | 10% | 8 / 10 (várias taxas) |
| 7326.90.30 | - - Stainless steel clamp assemblies with rubber sleeves of a kind used for hubless cast iron pipes and pipe fittings | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7326.90.60 | - - Bunsen burners | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7326.90.70 | - - Horseshoes; riding boot spurs | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| - - Other: | |||||
| 7326.90.91 | - - - Cigarette cases and boxes | kg/unit | 22,5% | 15% | 8 / 10 (várias taxas) |
| 7326.90.99 | - - - Other | kg/unit | 15% | 10% | 10 / 8 (várias taxas) |