SECTION XV · Capítulo 73

Articles of iron or steel

Nomenclatura y aranceles de 2026 del arancel consolidado BT2026. FUENTE

Notas de capítulo (5)

Notes

1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.

2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

(1): Tham khảo TCVN 197-1:2014, TCVN 8855-1:2011 và TCVN 5905:1995

(SEN): Tham khảo Chú giải bổ sung (SEN) của Danh mục Thuế quan hài hòa ASEAN (AHTN) 2022

Código SADescripciónUnidadDerecho de importación ordinarioMFNVAT
7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
7301.10.00 - Sheet piling kg 4,5% 3% 10 / 8 (varios tipos)
7301.20.00 - Angles, shapes and sections kg 7,5% 5% 10 / 8 (varios tipos)
7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails
7302.10.00 - Rails kg 4,5% 3% 10 / 8 (varios tipos)
7302.30.00 - Switch blades, crossing frogs, point rods and other crossing pieces kg 4,5% 3% 10 / 8 (varios tipos)
7302.40.00 - Fish-plates and sole plates kg 4,5% 3% 10 / 8 (varios tipos)
7302.90 - Other:
7302.90.10 - - Sleepers (cross-ties) kg 4,5% 3% 10 / 8 (varios tipos)
7302.90.90 - - Other kg 4,5% 3% 10 / 8 (varios tipos)
7303 Tubes, pipes and hollow profiles, of cast iron
- Tubes and pipes:
7303.00.11 - - Hubless tubes and pipes kg 15% 10% 10 / 8 (varios tipos)
7303.00.19 - - Other kg 15% 10% 10 / 8 (varios tipos)
- Other:
7303.00.91 - - With an external diameter not exceeding 100 mm kg 4,5% 3% 10 / 8 (varios tipos)
7303.00.99 - - Other kg 4,5% 3% 10 / 8 (varios tipos)
7304 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
- Line pipe of a kind used for oil or gas pipelines:
7304.11.00 - - Of stainless steel kg 5% 0% 10 / 8 (varios tipos)
7304.19.00 - - Other kg 5% 0% 10 / 8 (varios tipos)
- Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22 - - Drill pipe of stainless steel:
7304.22.10 - - - With a yield strength less than 80,000 psi, without threaded end kg 5% 0% 10 / 8 (varios tipos)
7304.22.90 - - - Other kg 5% 0% 10 / 8 (varios tipos)
7304.23 - - Other drill pipe:
7304.23.10 - - - With a yield strength less than 80,000 psi, without threaded end kg 5% 0% 10 / 8 (varios tipos)
7304.23.90 - - - Other kg 5% 0% 10 / 8 (varios tipos)
7304.24 - - Other, of stainless steel:
7304.24.10 - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end kg 7,5% 5% 10 / 8 (varios tipos)
7304.24.20 - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end kg 5% 0% 10 / 8 (varios tipos)
7304.24.30 - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end kg 5% 0% 10 / 8 (varios tipos)
7304.29 - - Other:
7304.29.10 - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end kg 7,5% 5% 10 / 8 (varios tipos)
7304.29.20 - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end kg 5% 0% 10 / 8 (varios tipos)
7304.29.30 - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end kg 5% 0% 10 / 8 (varios tipos)
- Other, of circular cross-section, of iron or non-alloy steel:
7304.31 - - Cold-drawn or cold-rolled (cold - reduced):
7304.31.10 - - - Drillrod casing and tubing with pin and box threads kg 7,5% 5% 10 / 8 (varios tipos)
7304.31.20 - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi kg 5% 0% 10 / 8 (varios tipos)
7304.31.40 - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon kg 15% 10% 10 / 8 (varios tipos)
7304.31.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7304.39 - - Other:
7304.39.20 - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi kg 5% 0% 10 / 8 (varios tipos)
7304.39.40 - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon kg 15% 10% 10 / 8 (varios tipos)
7304.39.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- Other, of circular cross-section, of stainless steel:
7304.41.00 - - Cold-drawn or cold-rolled (cold-reduced) kg 5% 0% 10 / 8 (varios tipos)
7304.49.00 - - Other kg 5% 0% 10 / 8 (varios tipos)
- Other, of circular cross-section, of other alloy steel:
7304.51 - - Cold-drawn or cold-rolled (cold-reduced):
7304.51.10 - - - Drillrod casing and tubing with pin and box threads kg 5% 0% 10 / 8 (varios tipos)
7304.51.20 - - - High-pressure pipe with a yield strength not less than 42,000 psi kg 5% 0% 10 / 8 (varios tipos)
7304.51.90 - - - Other kg 5% 0% 10 / 8 (varios tipos)
7304.59 - - Other:
7304.59.10 - - - High-pressure pipe with a yield strength not less than 42,000 psi kg 5% 0% 10 / 8 (varios tipos)
7304.59.90 - - - Other kg 5% 0% 10 / 8 (varios tipos)
7304.90 - Other:
7304.90.10 - - High-pressure pipe with a yield strength not less than 42,000 psi kg 5% 0% 10 / 8 (varios tipos)
7304.90.30 - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon kg 15% 10% 10 / 8 (varios tipos)
7304.90.90 - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7305 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel
- Line pipe of a kind used for oil or gas pipelines:
7305.11.00 - - Longitudinally submerged arc welded kg 7,5% 5% 10 / 8 (varios tipos)
7305.12 - - Other, longitudinally welded:
7305.12.10 - - - Electric resistance welded (ERW) kg 7,5% 5% 10 / 8 (varios tipos)
7305.12.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7305.19 - - Other:
7305.19.10 - - - Spiral or helical submerged arc welded kg 15% 10% 10 / 8 (varios tipos)
7305.19.90 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7305.20.00 - Casing of a kind used in drilling for oil or gas kg 7,5% 5% 10 / 8 (varios tipos)
- Other, welded:
7305.31 - - Longitudinally welded:
7305.31.10 - - - Stainless steel pipes and tubes kg 7,5% 5% 10 / 8 (varios tipos)
7305.31.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7305.39 - - Other:
7305.39.10 - - - High-pressure pipe with a yield strength not less than 42,000 psi kg 15% 10% 10 / 8 (varios tipos)
7305.39.90 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7305.90.00 - Other kg 7,5% 5% 10 / 8 (varios tipos)
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
- Line pipe of a kind used for oil or gas pipelines:
7306.11 - - Welded, of stainless steel:
7306.11.10 - - - Longitudinally electric resistance welded (ERW) kg 7,5% 5% 10 / 8 (varios tipos)
7306.11.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7306.19 - - Other:
7306.19.10 - - - Longitudinally electric resistance welded (ERW) kg 7,5% 5% 10 / 8 (varios tipos)
7306.19.20 - - - Spiral or helical submerged arc welded kg 7,5% 5% 10 / 8 (varios tipos)
7306.19.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- Casing and tubing of a kind used in drilling for oil or gas:
7306.21.00 - - Welded, of stainless steel kg 7,5% 5% 10 / 8 (varios tipos)
7306.29.00 - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7306.30 - Other, welded, of circular cross-section, of iron or non-alloy steel:
- - Boiler tubes:
7306.30.11 - - - With an external diameter less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.30.19 - - - Other kg 15% 10% 10 / 8 (varios tipos)
- - Copper-plated, fluororesin-coated or zinc-chromated steel tubes with an external diameter not exceeding 15 mm:
7306.30.21 - - - With an external diameter less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.30.29 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7306.30.30 - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm kg 15% 10% 10 / 8 (varios tipos)
- - High-pressure pipe with a yield strength not less than 42,000 psi:
7306.30.41 - - - With an external diameter less than 12.5 mm kg 7,5% 5% 10 / 8 (varios tipos)
7306.30.49 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- - Other:
7306.30.91 - - - With an internal diameter of 12.5 mm or more, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon kg 15% 10% 10 / 8 (varios tipos)
7306.30.92 - - - With an internal diameter less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.30.99 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7306.40 - Other, welded, of circular cross-section, of stainless steel:
- - Boiler tubes:
7306.40.11 - - - With an external diameter not exceeding 12.5 mm kg 10,5% 7% 10 / 8 (varios tipos)
7306.40.19 - - - Other kg 10,5% 7% 10 / 8 (varios tipos)
7306.40.20 - - Stainless steel pipes and tubes, with an external diameter exceeding 105 mm kg 10,5% 7% 10 / 8 (varios tipos)
7306.40.30 - - Pipes and tubes containing by weight at least 30% of nickel, with an external diameter not exceeding 10 mm kg 10,5% 7% 10 / 8 (varios tipos)
7306.40.90 - - Other kg 5% 0% 10 / 8 (varios tipos)
7306.50 - Other, welded, of circular cross-section, of other alloy steel:
- - Boiler tubes:
7306.50.11 - - - With an external diameter less than 12.5 mm kg 7,5% 5% 10 / 8 (varios tipos)
7306.50.19 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- - Other:
7306.50.91 - - - With an external diameter less than 12.5 mm kg 7,5% 5% 10 / 8 (varios tipos)
7306.50.99 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- Other, welded, of non-circular cross-section:
7306.61 - - Of square or rectangular cross-section:
7306.61.10 - - - With an external diagonal cross-section less than 12.5 mm kg 7,5% 5% 10 / 8 (varios tipos)
7306.61.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7306.69 - - Of other non-circular cross-section:
7306.69.10 - - - With an external diagonal cross-section less than 12.5 mm kg 7,5% 5% 10 / 8 (varios tipos)
7306.69.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7306.90 - Other:
- - Copper brazed pipes and tubes:
7306.90.11 - - - With an external diagonal cross-section less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.90.19 - - - Other kg 15% 10% 10 / 8 (varios tipos)
- - Other:
7306.90.91 - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.90.94 - - - Other high pressure pipes, with an external diameter of less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.90.95 - - - Other high pressure pipes, with an external diameter of 12.5 mm or more kg 15% 10% 10 / 8 (varios tipos)
7306.90.96 - - - Other, with an external diagonal cross-section less than 12.5 mm kg 15% 10% 10 / 8 (varios tipos)
7306.90.97 - - - Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon kg 15% 10% 10 / 8 (varios tipos)
7306.90.99 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
- Cast fittings:
7307.11 - - Of non-malleable cast iron:
7307.11.10 - - - Hubless tube or pipe fittings kg 7,5% 5% 10 / 8 (varios tipos)
7307.11.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7307.19.00 - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- Other, of stainless steel:
7307.21 - - Flanges:
7307.21.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (varios tipos)
7307.21.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7307.22 - - Threaded elbows, bends and sleeves:
7307.22.10 - - - Having an internal diameter of less than 15 cm kg 15% 10% 10 / 8 (varios tipos)
7307.22.90 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7307.23 - - Butt welding fittings:
7307.23.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (varios tipos)
7307.23.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7307.29 - - Other:
7307.29.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (varios tipos)
7307.29.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
- Other:
7307.91 - - Flanges:
7307.91.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (varios tipos)
7307.91.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7307.92 - - Threaded elbows, bends and sleeves:
7307.92.10 - - - Having an internal diameter of less than 15 cm kg 15% 10% 10 / 8 (varios tipos)
7307.92.90 - - - Other kg 15% 10% 10 / 8 (varios tipos)
7307.93 - - Butt welding fittings:
7307.93.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (varios tipos)
7307.93.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7307.99 - - Other:
7307.99.10 - - - Having an internal diameter of less than 15 cm kg 7,5% 5% 10 / 8 (varios tipos)
7307.99.90 - - - Other kg 7,5% 5% 10 / 8 (varios tipos)
7308 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
7308.10 - Bridges and bridge-sections:
7308.10.10 - - Prefabricated modular type joined by shear connectors kg 5% 0% 8 / 10 (varios tipos)
7308.10.90 - - Other kg 4,5% 3% 8 / 10 (varios tipos)
7308.20 - Towers and lattice masts:
- - Towers:
7308.20.11 - - - Prefabricated modular type joined by shear connectors kg 4,5% 3% 8 / 10 (varios tipos)
7308.20.19 - - - Other kg 4,5% 3% 8 / 10 (varios tipos)
- - Lattice masts:
7308.20.21 - - - Prefabricated modular type joined by shear connectors kg 7,5% 5% 8 / 10 (varios tipos)
7308.20.29 - - - Other kg 7,5% 5% 8 / 10 (varios tipos)
7308.30 - Doors, windows and their frames and thresholds for doors:
7308.30.10 - - Doors, of a thickness of 6 mm or more but not exceeding 8 mm kg 18% 12% 8 / 10 (varios tipos)
7308.30.90 - - Other kg 18% 12% 8 / 10 (varios tipos)
7308.40 - Equipment for scaffolding, shuttering, propping or pit-propping:
7308.40.10 - - Prefabricated modular type joined by shear connectors kg 4,5% 3% 8 / 10 (varios tipos)
7308.40.90 - - Other kg 4,5% 3% 8 / 10 (varios tipos)
7308.90 - Other:
7308.90.20 - - Prefabricated modular type joined by shear connectors kg 15% 10% 8 / 10 (varios tipos)
7308.90.40 - - Corrugated and curved galvanised plates or sheets prepared for use in conduits, culverts or tunnels kg 15% 10% 8 / 10 (varios tipos)
7308.90.50 - - Rails for ships kg 15% 10% 8 / 10 (varios tipos)
7308.90.60 - - Perforated cable trays kg 15% 10% 8 / 10 (varios tipos)
- - Other:
7308.90.92 - - - Guardrails kg 15% 10% 8 / 10 (varios tipos)
7308.90.99 - - - Other kg 15% 10% 8 / 10 (varios tipos)
7309 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
- Of a kind used for the conveyance or packing of goods:
7309.00.11 - - Lined or heat-insulated kg/unit 7,5% 5% 8 / 10 (varios tipos)
7309.00.19 - - Other kg/unit 7,5% 5% 8 / 10 (varios tipos)
- Other:
7309.00.91 - - Lined or heat-insulated kg/unit 7,5% 5% 8 / 10 (varios tipos)
7309.00.99 - - Other kg/unit 7,5% 5% 8 / 10 (varios tipos)
7310 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
7310.10 - Of a capacity of 50 l or more:
7310.10.10 - - Of tinplate kg/unit 18% 12% 8 / 10 (varios tipos)
- - Other:
7310.10.91 - - - Casting, forging or stamping, in the rough state kg/unit 18% 12% 8 / 10 (varios tipos)
7310.10.99 - - - Other kg/unit 18% 12% 8 / 10 (varios tipos)
- Of a capacity of less than 50 l:
7310.21 - - Cans which are to be closed by soldering or crimping:
- - - Of a capacity of less than 1 l:
7310.21.11 - - - - Of tinplate kg/unit 22,5% 15% 8 / 10 (varios tipos)
7310.21.19 - - - - Other kg/unit 22,5% 15% 8 / 10 (varios tipos)
- - - Other:
7310.21.91 - - - - Of tinplate kg/unit 15% 10% 8 / 10 (varios tipos)
7310.21.99 - - - - Other kg/unit 18% 12% 8 / 10 (varios tipos)
7310.29 - - Other:
- - - Of a capacity of less than 1 l:
7310.29.11 - - - - Of tinplate kg/unit 22,5% 15% 8 / 10 (varios tipos)
7310.29.19 - - - - Other kg/unit 22,5% 15% 8 / 10 (varios tipos)
- - - Other:
7310.29.91 - - - - Of tinplate kg/unit 15% 10% 8 / 10 (varios tipos)
7310.29.92 - - - - Other casting, forging or stamping, in the rough state kg/unit 15% 10% 8 / 10 (varios tipos)
7310.29.99 - - - - Other kg/unit 15% 10% 8 / 10 (varios tipos)
7311 Containers for compressed or liquefied gas, of iron or steel
- Seamless steel cylinders:
7311.00.21 - - Of a capacity of 30 l or more, but less than 110 l, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) kg/unit 7,5% 5% 8 / 10 (varios tipos)
7311.00.22 - - Of a capacity of 110 l or more, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) kg/unit 5% 0% 8 / 10 (varios tipos)
7311.00.23 - - Of a capacity of less than 30 l, for Liquefied Petroleum Gas (LPG) kg/unit 30% 20% 8 / 10 (varios tipos)
7311.00.24 - - Of a capacity of 30 l or more, but less than 110 l, for Liquefied Petroleum Gas (LPG) kg/unit 7,5% 5% 8 / 10 (varios tipos)
7311.00.25 - - Other, for Liquefied Petroleum Gas (LPG) kg/unit 5% 0% 8 / 10 (varios tipos)
7311.00.26 - - Other, of a capacity of less than 30 l kg/unit 30% 20% 8 / 10 (varios tipos)
7311.00.27 - - Other, of a capacity of 30 l or more, but less than 110 l kg/unit 7,5% 5% 8 / 10 (varios tipos)
7311.00.29 - - Other kg/unit 5% 0% 8 / 10 (varios tipos)
- Other:
7311.00.91 - - Of a capacity not exceeding 7.3 l kg/unit 25,5% 17% 8 / 10 (varios tipos)
7311.00.92 - - Of a capacity more than 7.3 l but less than 30 l kg/unit 25,5% 17% 8 / 10 (varios tipos)
7311.00.94 - - Of a capacity of 30 l or more, but less than 110 l kg/unit 7,5% 5% 8 / 10 (varios tipos)
7311.00.99 - - Other kg/unit 5% 0% 8 / 10 (varios tipos)
7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
7312.10 - Stranded wire, ropes and cables:
7312.10.10 - - Locked coils, flattened strands and non-rotating wire ropes kg 7,5% 5% 8 / 10 (varios tipos)
7312.10.20 - - Plated or coated with brass and of a diameter not exceeding 3 mm kg 7,5% 5% 8 / 10 (varios tipos)
7312.10.30 - - Plated or coated with aluminium kg 7,5% 5% 8 / 10 (varios tipos)
- - Other:
7312.10.91 - - - Stranded steel wire for prestressing concrete kg 4,5% 3% 8 / 10 (varios tipos)
7312.10.99 - - - Other kg 7,5% 5% 8 / 10 (varios tipos)
7312.90.00 - Other kg 7,5% 5% 8 / 10 (varios tipos)
7313.00.00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel kg 45% 30% 8 / 10 (varios tipos)
7314 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel
- Woven cloth:
7314.12.00 - - Endless bands for machinery, of stainless steel kg 22,5% 15% 8 / 10 (varios tipos)
7314.14.00 - - Other woven cloth, of stainless steel kg 22,5% 15% 8 / 10 (varios tipos)
7314.19 - - Other:
7314.19.10 - - - Endless bands for machinery other than of stainless steel kg 22,5% 15% 8 / 10 (varios tipos)
7314.19.90 - - - Other kg 22,5% 15% 8 / 10 (varios tipos)
7314.20.00 - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more kg 22,5% 15% 8 / 10 (varios tipos)
- Other grill, netting and fencing, welded at the intersection:
7314.31.00 - - Plated or coated with zinc kg 30% 20% 8 / 10 (varios tipos)
7314.39.00 - - Other kg 30% 20% 8 / 10 (varios tipos)
- Other cloth, grill, netting and fencing:
7314.41.00 - - Plated or coated with zinc kg 45% 30% 8 / 10 (varios tipos)
7314.42.00 - - Coated with plastics kg 45% 30% 8 / 10 (varios tipos)
7314.49.00 - - Other kg 45% 30% 8 / 10 (varios tipos)
7314.50.00 - Expanded metal kg 30% 20% 8 / 10 (varios tipos)
7315 Chain and parts thereof, of iron or steel
- Articulated link chain and parts thereof:
7315.11 - - Roller chain:
7315.11.10 - - - Bicycle or motorcycle chain kg/unit 52,5% 35% 8 / 10 (varios tipos)
- - - Other:
7315.11.91 - - - - Transmission type, of a pitch length of not less than 6 mm and not more than 32 mm kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.11.99 - - - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.12 - - Other chain:
7315.12.10 - - - Bicycle or motorcycle chain kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.12.90 - - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.19 - - Parts:
7315.19.10 - - - Of bicycle or motorcycle chain kg/unit 52,5% 35% 8 / 10 (varios tipos)
7315.19.90 - - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.20.00 - Skid chain kg/unit 4,5% 3% 8 / 10 (varios tipos)
- Other chain:
7315.81.00 - - Stud-link kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.82.00 - - Other, welded link kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.89 - - Other:
7315.89.10 - - - Bicycle or motorcycle chain kg/unit 45% 30% 8 / 10 (varios tipos)
7315.89.90 - - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7315.90 - Other parts:
7315.90.20 - - Of bicycle or motorcycle chain kg/unit 45% 30% 8 / 10 (varios tipos)
7315.90.90 - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7316.00.00 Anchors, grapnels and parts thereof, of iron or steel kg/unit 4,5% 3% 8 / 10 (varios tipos)
7317 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
7317.00.10 - Wire nails kg 30% 20% 8 / 10 (varios tipos)
7317.00.20 - Staples kg 30% 20% 8 / 10 (varios tipos)
7317.00.30 - Dog spikes for rail sleepers; gang nails kg 30% 20% 8 / 10 (varios tipos)
7317.00.90 - Other kg 30% 20% 8 / 10 (varios tipos)
7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel
- Threaded articles:
7318.11.00 - - Coach screws kg 7,5% 5% 8 / 10 (varios tipos)
7318.12 - - Other wood screws:
7318.12.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.12.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
7318.13.00 - - Screw hooks and screw rings kg 15% 10% 8 / 10 (varios tipos)
7318.14 - - Self-tapping screws:
7318.14.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.14.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
7318.15 - - Other screws and bolts, whether or not with their nuts or washers:
7318.15.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.15.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
7318.16 - - Nuts:
7318.16.10 - - - For bolts having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.16.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
7318.19 - - Other:
7318.19.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.19.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
- Non-threaded articles:
7318.21.00 - - Spring washers and other lock washers kg 18% 12% 8 / 10 (varios tipos)
7318.22.00 - - Other washers kg 18% 12% 8 / 10 (varios tipos)
7318.23 - - Rivets:
7318.23.10 - - - Having an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.23.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
7318.24.00 - - Cotters and cotter-pins kg 18% 12% 8 / 10 (varios tipos)
7318.29 - - Other:
7318.29.10 - - - Having a shank of an external diameter not exceeding 16 mm kg 18% 12% 8 / 10 (varios tipos)
7318.29.90 - - - Other kg 18% 12% 8 / 10 (varios tipos)
7319 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
7319.40 - Safety pins and other pins:
7319.40.10 - - Safety pins kg 45% 30% 8 / 10 (varios tipos)
7319.40.20 - - Other pins kg 45% 30% 8 / 10 (varios tipos)
7319.90 - Other:
7319.90.10 - - Sewing, darning or embroidery needles kg 45% 30% 8 / 10 (varios tipos)
7319.90.90 - - Other kg 45% 30% 8 / 10 (varios tipos)
7320 Springs and leaves for springs, of iron or steel
7320.10 - Leaf-springs and leaves therefor:
- - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30:
7320.10.11 - - - Suitable for use on motor vehicles of heading 87.02, 87.03 or 87.04 kg/unit 15% 10% 8 / 10 (varios tipos)
7320.10.12 - - - Suitable for use on other motor vehicles kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.10.19 - - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.10.90 - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.20 - Helical springs:
- - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30:
7320.20.11 - - - For motor vehicles kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.20.12 - - - For earth-moving machinery kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.20.19 - - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.20.90 - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.90 - Other:
7320.90.10 - - Suitable for use on motor vehicles kg/unit 4,5% 3% 8 / 10 (varios tipos)
7320.90.90 - - Other kg/unit 4,5% 3% 8 / 10 (varios tipos)
7321 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel
- Cooking appliances and plate warmers:
7321.11.00 - - For gas fuel or for both gas and other fuels unit 22,5% 15% 8 / 10 (varios tipos)
7321.12.00 - - For liquid fuel unit 30% 20% 8 / 10 (varios tipos)
7321.19 - - Other, including appliances for solid fuel:
7321.19.10 - - - For solid fuel unit 30% 20% 8 / 10 (varios tipos)
7321.19.90 - - - Other unit 30% 20% 8 / 10 (varios tipos)
- Other appliances:
7321.81.00 - - For gas fuel or for both gas and other fuels unit 22,5% 15% 8 / 10 (varios tipos)
7321.82.00 - - For liquid fuel unit 37,5% 25% 8 / 10 (varios tipos)
7321.89.00 - - Other, including appliances for solid fuel unit 37,5% 25% 8 / 10 (varios tipos)
7321.90 - Parts:
7321.90.10 - - Of kerosene stoves kg/unit 15% 10% 8 / 10 (varios tipos)
- - Of cooking appliances and plate warmers using gas fuel:
7321.90.21 - - - Burner; components made by stamping or pressing processes kg/unit 15% 10% 8 / 10 (varios tipos)
7321.90.29 - - - Other kg/unit 15% 10% 8 / 10 (varios tipos)
7321.90.90 - - Other kg/unit 15% 10% 8 / 10 (varios tipos)
7322 Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor- driven fan or blower, and parts thereof, of iron or steel
- Radiators and parts thereof:
7322.11.00 - - Of cast iron kg/unit 40,5% 27% 8 / 10 (varios tipos)
7322.19.00 - - Other kg/unit 45% 30% 8 / 10 (varios tipos)
7322.90.00 - Other kg/unit 30% 20% 8 / 10 (varios tipos)
7323 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel
7323.10.00 - Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like kg/unit 37,5% 25% 8 / 10 (varios tipos)
- Other:
7323.91 - - Of cast iron, not enamelled:
7323.91.10 - - - Kitchenware kg/unit 45% 30% 8 / 10 (varios tipos)
7323.91.20 - - - Ashtrays kg/unit 45% 30% 8 / 10 (varios tipos)
7323.91.90 - - - Other kg/unit 45% 30% 8 / 10 (varios tipos)
7323.92.00 - - Of cast iron, enamelled kg/unit 45% 30% 8 / 10 (varios tipos)
7323.93 - - Of stainless steel:
7323.93.10 - - - Kitchenware kg/unit 45% 30% 8 / 10 (varios tipos)
7323.93.20 - - - Ashtrays kg/unit 45% 30% 8 / 10 (varios tipos)
7323.93.90 - - - Other kg/unit 45% 30% 8 / 10 (varios tipos)
7323.94.00 - - Of iron (other than cast iron) or steel, enamelled kg/unit 45% 30% 8 / 10 (varios tipos)
7323.99 - - Other:
7323.99.10 - - - Kitchenware kg/unit 30% 20% 8 / 10 (varios tipos)
7323.99.20 - - - Ashtrays kg/unit 30% 20% 8 / 10 (varios tipos)
7323.99.90 - - - Other kg/unit 30% 20% 8 / 10 (varios tipos)
7324 Sanitary ware and parts thereof, of iron or steel
7324.10 - Sinks and wash basins, of stainless steel:
7324.10.10 - - Kitchen sinks kg/unit 30% 20% 8 / 10 (varios tipos)
7324.10.90 - - Other kg/unit 30% 20% 8 / 10 (varios tipos)
- Baths:
7324.21 - - Of cast iron, whether or not enamelled:
7324.21.10 - - - Bathtubs having rectangular or oblong interior shape kg/unit 52,5% 35% 8 / 10 (varios tipos)
7324.21.90 - - - Other kg/unit 52,5% 35% 8 / 10 (varios tipos)
7324.29 - - Other:
7324.29.10 - - - Bathtubs having rectangular or oblong interior shape kg/unit 52,5% 35% 8 / 10 (varios tipos)
7324.29.90 - - - Other kg/unit 52,5% 35% 8 / 10 (varios tipos)
7324.90 - Other, including parts:
7324.90.10 - - Flushing water closets or urinals (fixed type) kg/unit 30% 20% 8 / 10 (varios tipos)
- - Other:
7324.90.91 - - - Parts of kitchen sinks or bathtubs kg/unit 30% 20% 8 / 10 (varios tipos)
7324.90.93 - - - Parts of flushing water closets or urinals (fixed type) kg/unit 30% 20% 8 / 10 (varios tipos)
7324.90.99 - - - Other kg/unit 30% 20% 8 / 10 (varios tipos)
7325 Other cast articles of iron or steel
7325.10 - Of non-malleable cast iron:
7325.10.20 - - Manhole covers, gratings and frames therefor kg/unit 30% 20% 8 / 10 (varios tipos)
7325.10.30 - - Spouts and cups for latex collection kg/unit 22,5% 15% 8 / 10 (varios tipos)
7325.10.90 - - Other kg/unit 22,5% 15% 10 / 8 (varios tipos)
- Other:
7325.91.00 - - Grinding balls and similar articles for mills kg/unit 30% 20% 8 / 10 (varios tipos)
7325.99 - - Other:
7325.99.20 - - - Manhole covers, gratings and frames therefor kg/unit 30% 20% 8 / 10 (varios tipos)
7325.99.90 - - - Other kg/unit 30% 20% 10 / 8 (varios tipos)
7326 Other articles of iron or steel
- Forged or stamped, but not further worked:
7326.11.00 - - Grinding balls and similar articles for mills kg/unit 30% 20% 8 / 10 (varios tipos)
7326.19.00 - - Other kg/unit 15% 10% 8 / 10 (varios tipos)
7326.20 - Articles of iron or steel wire:
7326.20.50 - - Poultry cages and the like kg/unit 30% 20% 8 / 10 (varios tipos)
7326.20.60 - - Rat traps kg/unit 22,5% 15% 8 / 10 (varios tipos)
7326.20.70 - - Wire mesh curtain and blinds kg/unit 22,5% 15% 8 / 10 (varios tipos)
7326.20.90 - - Other kg/unit 22,5% 15% 8 / 10 (varios tipos)
7326.90 - Other:
7326.90.10 - - Ships' rudders kg/unit 7,5% 5% 8 / 10 (varios tipos)
7326.90.20 - - Spouts and cups for latex collection kg/unit 15% 10% 8 / 10 (varios tipos)
7326.90.30 - - Stainless steel clamp assemblies with rubber sleeves of a kind used for hubless cast iron pipes and pipe fittings kg/unit 22,5% 15% 8 / 10 (varios tipos)
7326.90.60 - - Bunsen burners kg/unit 22,5% 15% 8 / 10 (varios tipos)
7326.90.70 - - Horseshoes; riding boot spurs kg/unit 22,5% 15% 8 / 10 (varios tipos)
- - Other:
7326.90.91 - - - Cigarette cases and boxes kg/unit 22,5% 15% 8 / 10 (varios tipos)
7326.90.99 - - - Other kg/unit 15% 10% 10 / 8 (varios tipos)